FLEXIBLE POLYURETHANE ULTIMATE COMFORT COMMERCIAL FOAM GRADE HR38-200CM5 1.

Description

Joyce Foam Products, Ultimate Comfort Commercial Foam Grade HR38-200CM5 is a combustion modified high resilience flexible foam and is manufactured by an advanced foaming technology which provides superior cushioning performance and combustion modified characteristics without chlorofluorcarbons (CFC’s) or other auxiliary blowing agents. The flammability test results classify material according to laboratory test conditions only. The numerical values listed are not intended to reflect hazards presented by this or any other material under actual fire conditions. The numerical values listed are for clean, new product only, and are not intended to reflect values obtained if the material is used in combination with, or is contaminated by other materials. It is recommended that before use, the customer conduct his own tests to ensure that the product complies with his own requirements. If Joyce Foam Products can be of fu rther assistance, please contact us. 2.

Application

Ultimate Comfort Commercial Grade HR38-200CM5 is designed for firm cushioning applications, in domestic, commercial and institutional furniture. 3.

Typical Properties*

a)

Density

38 kg/m 3 nominal

b)

Tensile Strength

50 kPa min

c)

Elongation

90% min

d)

Tear Resistance

120 N/m min

e)

Indentation Force on Deflection (i) 40% (ii) Indentation Factor

200 ± 30 N 2.2 min

Compression Set (i) 90%

10% max

f)

g)

Resilience

h)

Flammability - meets the requirement of: (i) (ii)

45 % min

U.K. Furniture & Furniture Fire Safety Regulations 1988 (BS5852 Part 2 - Source 5 Crib Test [modified ])** *Test method: - refer AS2282 **In house testing only

Please refer to relevant industry, state and national building codes/legislation when using this product in industrial and commercial applications. Joyce Foam Products accepts no responsibility for actual applications. Joyce Foam Products reserves the right to change any of the properties without specific reference to current or intending users but will make every effort to communicate the fact appropriately if changes are made. (Iss 1 ~ Nov 2012)

38-200.pdf

d) Tear Resistance 120 N/m min. e) Indentation Force on Deflection. (i) 40% 200 ± 30 N. (ii) Indentation Factor 2.2 min. f) Compression Set. (i) 90% 10% max.

70KB Sizes 1 Downloads 213 Views

Recommend Documents

No documents