CertBus.com
EW0-100 Q&As Extreme Networks Associate (ENA) Pass Extreme Networks EW0-100 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: http://www.CertBus.com/EW0-100.html 100% Passing Guarantee 100% Money Back Assurance
Following Questions and Answers are all new published by Extreme Networks Official Exam Center
Instant Download After Purchase 100% Money Back Guarantee 365 Days Free Update 80000+ Satisfied Customers
Vendor: Extreme Networks
Exam Code: EW0-100
Exam Name: Extreme Networks Associate (ENA)
Version: Demo
100% Real Q&As | 100 Real Pass | CertBus.com Exam A QUESTION 1 What is the default value for the RIP garbagetime setting? A. B. C. D.
30 seconds 60 seconds 120 seconds 180 seconds
Correct Answer: C QUESTION 2 Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and 192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the following command: config ospf routerid automatic? A. B. C. D.
10.0.0.1/24 10.10.10.10/24 192.168.0.1/24 192.168.255.254/24
Correct Answer: D QUESTION 3 Which command would you use to configure VLAN corporate with IP address 192.168.0.1/16? A. B. C. D.
config vlan corporate ipaddress 192.168.0.1/16 config ipaddress corporate vlan 192.168.0.1/16 config ipaddress 192.168.0.1/16 vlan corporate config ipaddress 192.168.0.1/16 corporate vlan
Correct Answer: A QUESTION 4 VLAN aggregation allows multiple sub-VLANs to share a single IP subnet. A. True B. False Correct Answer: A QUESTION 5 How do you disable Split Horizon? A. B. C. D.
disable rip splithorizon noadvertise unconfig rip splithorizon disable rip splithorizon unconfig rip splithorizon noadvertise
Correct Answer: C QUESTION 6 Exhibit:
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com
Given this display, how would you find information similar to the SHOW SWITCH command? A. B. C. D.
Click on STATISTICS, then SHOW, then SWITCH. Click on STATISTICS, then SWITCH, then SHOW. Click on STATISTICS, then SHOW. Click on STATISTICS, then SWITCH.
Correct Answer: D QUESTION 7 Which ExtremeWare feature permits ESRP to increase the number of protected VLANs by placing them under the control of a master VLAN? A. B. C. D.
ESRP groups ESRP domains ESRP host attach None of these.
Correct Answer: B QUESTION 8 STPDs s0, s1, and s2 have been created. How would you activate only s1 while leaving the other STPDs inactive? A. enable stpd s1 B. enable s1 stpd C. None of these Correct Answer: A QUESTION 9 SNMP access to ExtremeWare can be limited by the following methods: A. Use an access list B. Use an access profile
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com C. Use the disable snmp access command D. None of these Correct Answer: ABC QUESTION 10 How would you change the password for John Doe's management account? A. B. C. D.
Enter config jdoe and then enter the new password twice. Enter config jdoe user account and then enter the new password twice. Enter config user account jdoe and then enter the new password twice. Enter config account jdoe and then enter the new password twice.
Correct Answer: D QUESTION 11 What is the minimum ExtremeWare software version that supports the Summit48i? A. B. C. D.
ExtremeWare 4.x ExtremeWare 5.x ExtremeWare 6.x None of the above
Correct Answer: C QUESTION 12 When using Spanning Tree Protocol, ExtremeWare permits VLANs in different STPDs to share the same port when tagged. A. True B. False Correct Answer: B QUESTION 13 Which of the following routes will be used to forward a frame to 192.168.1.174? A. B. C. D.
192.168.1.0/29 192.168.1.128/30 192.168.1.128/25 None of these.
Correct Answer: C QUESTION 14 In RIP, poison reverse means that: A. B. C. D.
A route is not advertised to the interface from which it was learned. A route is advertised as unreachable to the interface from which it was learned. Traffic whose source interface does not match the routing table is blackholed. None of these.
Correct Answer: B QUESTION 15 RIP version 2 uses a composite metric that includes link speed and delay. A. True
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com B. False Correct Answer: B QUESTION 16 Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both the data link and network layers. A. True B. False Correct Answer: A QUESTION 17 __________ allow(s) multiple VLANs to be controlled by a single ESRP instance. A. B. C. D.
ESRP domains ESRP groups ESRP host-attach None of these.
Correct Answer: A QUESTION 18 QoS policy is applied _____ in an Extreme switch. A. B. C. D.
per port per queue, per port per queue None of these.
Correct Answer: B QUESTION 19 Without QoS, all packets are allowed equal access to an egress port. A. True B. False Correct Answer: A QUESTION 20 Which of the following is not advertised in an OSPF Link State Advertisement? A. B. C. D.
Costs Link utilization Router interfaces Neighbor information
Correct Answer: B QUESTION 21 A VLAN can be a member of up to 64 STPDs. A. True B. False Correct Answer: B
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com
QUESTION 22 What type of area is used to limit external routes? A. B. C. D.
Stub area Normal area Backbone area None of these
Correct Answer: A QUESTION 23 All OSPF routers in the same area must have the same LSDB. A. True B. False Correct Answer: A QUESTION 24 Which RIP settings are enabled by default? A. B. C. D.
Triggered updates Poison Reverse Split Horizon Route redistribution
Correct Answer: ABC QUESTION 25 What is the default STP forward delay value? A. B. C. D.
2 seconds 10 seconds 15 seconds 20 seconds
Correct Answer: C QUESTION 26 Which command would you use to configure the switch to disregard STP for selected VLANs? A. B. C. D.
enable ignore-stp vlan enable ignore-bpdu vlan enable ignore-bpdu stpd enable ignore-stp vlan
Correct Answer: D QUESTION 27 When the command disable stpd port 4:1-4:8 is entered what is the result? A. B. C. D.
Ports 4:1-4:8 are placed into the blocking state. Ports 4:1-4:8 are placed into the listening state. Ports 4.1-4.8 are placed into the learning state. Ports 4:1-4:8 are placed into the forwarding state.
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com Correct Answer: D QUESTION 28 How can you tell which ports are disabled? A. B. C. D.
Flashing amber light Flashing green light Flashing red light None of these
Correct Answer: B QUESTION 29 Your Summit5i switch is connected to a 3rd party switch. By issuing the show ports rxerrors command you can see numerous CRC errors listed. What is the first step you should take to resolve this issue? A. B. C. D.
Examine the log for errors. Ping between the two switches. Match the speed and duplex settings for the two devices. Call the Extreme Networks TAC.
Correct Answer: C QUESTION 30
You have been assigned the task of configuring an 8-port load share group between two switches that uses the round robin-based algorithm. Which of the following commands will provide you with the desired result? A. Summit #1: config sharing 1 grouping 1-8 algorithm round-robin, Summit #2: configsharing 1 grouping 1-8 algorithm round-robin B. Summit #1: enable sharing 1 grouping 1-8 algorithm round-robin, Summit #2: enablesharing 8 grouping 1-8 algorithm round-robin
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com C. Summit #1: config sharing 1 grouping 1-8 algorithm round-robin, Summit #2: configsharing 8 grouping 1-8 algorithm round-robin D. Summit #1: enable sharing 1 grouping 1-8 algorithm round-robin, Summit #2: enablesharing 1 grouping 1-8 algorithm round-robin Correct Answer: D QUESTION 31 Routing is disabled in all VLANs by default. A. True B. False Correct Answer: A QUESTION 32 What information can you find using the show edp command? A. B. C. D.
ExtremeWare code version used by remote switch. The ports that are disabled on the remote switch. The master port of any load share groups. The speed and duplex settings of the ports connecting the two switches.
Correct Answer: A QUESTION 33 How could you verify that MAC address learning is disabled for ports 1-8 on a Summit7i switch? A. B. C. D.
Enter the show ports config detail command. Enter the show ports management detail command. Enter the show ports statistics detail command. Enter the show ports info detail command.
Correct Answer: D QUESTION 34 Which of the following are valid ESRP master election algorithms? A. B. C. D.
ports_track_priority_mac ports_priority_track_mac track_ports_priority_mac track_priority_ports_mac
Correct Answer: AC QUESTION 35 What is the command you would use to configure a VLAN for ESRP? A. B. C. D.
enable esrp vlan enable esrp vlan detail config esrp vlan config esrp vlan detail
Correct Answer: A QUESTION 36 Which command would you use to configure ESRP ping tracking for the gateway address 10.0.0.1 with a frequency of 2 seconds and a miss threshold of 5?
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com
A. B. C. D.
enable vlan add track-ping add 10.0.0.1 frequency 2 miss 5 enable esrp add track-ping add 10.0.0.1 frequency 2 miss 5 config esrp track-ping add 10.0.0.1 frequency 2 miss 5 config vlan add track-ping 10.0.0.1 frequency 2 miss 5
Correct Answer: D QUESTION 37 Which of the following is the default ESRP hello timer setting? A. B. C. D.
2 seconds 5 seconds 10 seconds 20 seconds
Correct Answer: A QUESTION 38 Which commands would you use to configure an ESRP domain with VLAN HQ as the super- ESRP-VLAN and VLAN floor-1 as the sub-ESRP-VLAN? A. B. C. D.
config vlan floor-1 add domain-member vlan hq config vlan hq add domain-member vlan floor-1 config domain-member vlan hq vlan floor-1 config domain-member vlan floor-1 vlan hq
Correct Answer: B QUESTION 39 Which of the following commands could you use to determine which ports are enabled for ESRP host attach? A. B. C. D.
show ports info detail show esrp detail show esrp show ports config
Correct Answer: B QUESTION 40 What effect does the hierarchical model of OSPF have on network traffic? A. B. C. D.
LSAs are not forwarded outside of their areas. Only routers in area 0.0.0.0 must run the SPF algorithm. Virtual links are needed for OSPF routing to function. ABRs consolidate all LSAs into one LSDB.
Correct Answer: A QUESTION 41 A VLAN configured for routing can support only one physical port. A. True B. False Correct Answer: B
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com
QUESTION 42 OSPF area 20.20.20.20 connects to OSPF area 2.2.2.2. The network has been running for a week without issues. While examining the LSDB of an internal router in area 20.20.20.20, the network administrator sees that there are no Type-2 LSAs for area 2.2.2.2 listed. The network administrator asks your opinion about this. What do you say? A. B. C. D.
Type-2 LSAs are not forwarded outside of their area. Type-2 LSAs are not seen because Type-4 LSAs are enabled. Type-5 LSAs include the necessary Type-2 LSA information. None of these.
Correct Answer: A QUESTION 43 OSPF area 0.0.0.0 is connected to area 1.1.1.1. Stub area 2.2.2.2 is connected to area 1.1.1.1. Area 2.2.2.2 routers show only directly connected networks in their IP route tables. What must you do to resolve this situation? A. B. C. D.
Create a virtual link between areas 0.0.0.0 and 2.2.2.2. Create a virtual link between areas 2.2.2.2 and 0.0.0.0. Create a virtual link between areas 1.1.1.1 and 2.2.2.2. Create a virtual link between areas 1.1.1.1 and 0.0.0.0.
Correct Answer: AB QUESTION 44 Which of the following are ways the IP route table becomes populated? A. B. C. D.
UDP-forwarding proxy ARP RIP None of these.
Correct Answer: C QUESTION 45 Which of the following are ways the IP route table becomes populated? A. B. C. D.
access policies IPX RIP OSPF None of these.
Correct Answer: C QUESTION 46 Which of the following are ways the IP route table becomes populated? A. B. C. D.
IP multinetting BGP VLAN aggregation None of these.
Correct Answer: B QUESTION 47
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com Which of the following are ways the IP route table becomes populated? A. B. C. D.
default routes IGMP snooping relative route priorities None of these.
Correct Answer: A QUESTION 48 In order for proxy ARP to work correctly the router interface must receive a valid ARP request. A. True B. False Correct Answer: A QUESTION 49 A MAC address must be configured for each physical port before routing can be configured. A. True B. False Correct Answer: B QUESTION 50 Which command would you use to create a default route with a metric of 5 and a gateway of 10.0.0.1? A. B. C. D.
config iproute add default 10.0.0.1 5 config iproute add default 5 10.0.0.1 config iproute add default 10.0.0.1 5 config iproute add default 5 10.0.0.1
Correct Answer: A QUESTION 51 Which command would you use to create a blackhole route that blocks traffic to the 10.0.0.0/8 network? A. B. C. D.
config iproute add 10.0.0.0/8 blackhole config blackhole iproute add 10.0.0.0/8 config iproute add blackhole 10.0.0.0/8 None of these.
Correct Answer: C QUESTION 52 What is the meaning of the following command: con ipr a bl 10.11.12.0/24 A. B. C. D.
Configure a blackhole route that blocks traffic destined to the 10.11.12.0/24 network. Configure a default route that forwards traffic destined to the 10.11.12.0/24 network. Configure a static route that forwards traffic destined to the 10.11.12.0/24 network. None of these.
Correct Answer: A QUESTION 53 How do you remove the IP address that has been assigned to the default VLAN?
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com A. B. C. D.
config default unconfig ipaddress config default delete ipaddress unconfig default ipaddress disable default ipaddress
Correct Answer: C QUESTION 54 What steps would you take to configure a VLAN to only allow IP-related traffic? A. B. C. D.
config protocol ip config protocol ip config ip protocol None of these.
Correct Answer: A QUESTION 55 What is the result of the protocol for VLAN corporate being NONE? A. B. C. D.
VLAN corporate will not forward any traffic. VLAN corporate must be a tagged VLAN. It is not possible for a VLAN to have NONE listed as the protocol. None of these.
Correct Answer: A QUESTION 56 The IP protocol filter has mistakenly been deleted from your switch. Which commands will you use to restore it to the switch? A. B. C. D.
create protocol ip etype 0800 create protocol ip etype 0802 create protocol ip etype 0804 create protocol ip etype 0806
Correct Answer: AD QUESTION 57 ExtremeWare supports ECMP for which of the following? A. B. C. D.
OSPF routes RIP routes Static routes All of these
Correct Answer: AC QUESTION 58 What is the default 802.1Q ethertype used by Extreme Networks switches? A. B. C. D.
0x8000 0x8100 0x9000 0x9100
Correct Answer: B
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com
QUESTION 59 How would you schedule a configuration download to occur at regular intervals? A. B. C. D.
download config download config download config every download config every
Correct Answer: D QUESTION 60 How would you schedule a configuration download to occur at regular intervals? A. B. C. D.
upload config every upload config upload config upload config every
Correct Answer: A QUESTION 61 Exhibit:
After using the disable web command you later issue the show session command and see the following. How was it possible for someone to login through ExtremeWare Vista? A. B. C. D.
Admin level accounts can always login through console, telnet, and HTTP. You did not reboot after issuing the disable web command. You did not save the configuration after issuing the disable web command. The disable web command does not exist.
Correct Answer: B QUESTION 62 How will you change the CLI prompt from the default display to NA-CHI-B6-F2-001? A. B. C. D.
config snmp syslocation NA-CHI-B6-F2-001 config snmp sysname NA-CHI-B6-F2-001 config cli prompt NA-CHI-B6-F2-001 config cli display NA-CHI-B6-F2-001
Correct Answer: B QUESTION 63 Exhibit:
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com
What is the last key that must be pressed to boot using the secondary image and configuration? A. B. C. D.
2 4 f p
Correct Answer: C QUESTION 64 Extreme Networks "I" series switches support wire-speed routing for the following protocols. A. B. C. D.
IPX DECNET IP Appletalk
Correct Answer: AC QUESTION 65 What type of flow control should be used when configuring a console connection for an Extreme Networks switch? A. B. C. D.
XON/XOFF Hardware Automatic None of these.
Correct Answer: A QUESTION 66 Which of the following command line statements will configure an IP address on the default VLAN? A. config vlan default xnetid 192.168.1.1 255.255.255.0 B. config default ipaddress 192.168.1.1/24 C. enable vlan default ipaddress 192.168.1.1 255.255.255.0
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com D. enable vlan default xnetid 192.168.1.1/24 Correct Answer: B QUESTION 67 An Ethernet port cannot be added to two VLANs as untagged with the following exception: A. B. C. D.
Neither VLAN has a configured 802.1Q tag. Both VLANs are configured for differing protocol types. 802.1Q negotiation is enabled on both VLANs. None of these.
Correct Answer: B QUESTION 68 Which of these are valid load sharing algorithms? A. B. C. D.
Port-based MAC-based Ratio-based All of these.
Correct Answer: A QUESTION 69 Which of these are valid load sharing algorithms? A. B. C. D.
Ratio-based Address based MAC-based All of these.
Correct Answer: B QUESTION 70 Which of these are valid load sharing algorithms? A. B. C. D.
MAC-based Ratio-based Round robin-based All of these.
Correct Answer: C QUESTION 71 What VLAN types are supported in ExtremeWare? A. B. C. D.
MAC-based VLAN Protocol-based VLAN 802.1Q tagged VLAN None of these.
Correct Answer: ABC QUESTION 72 When a port is added to a tagged VLAN, jumbo frame support must be enabled to compensate for the increased frame size.
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com A. True B. False Correct Answer: B QUESTION 73 ExtremeWare automatically compensates for the increase in frame size when enabling vMAN tagging. A. True B. False Correct Answer: B QUESTION 74 RIP version 2 advertises routes to its neighbors using an IP broadcast. A. True B. False Correct Answer: B QUESTION 75 Broadcast frames are the only frames that may flood across VLANs. A. True B. False Correct Answer: B QUESTION 76 The switch with the __________ is elected as the root bridge. A. B. C. D.
highest number of active ports lowest numerical bridge ID highest numerical bridge ID None of these
Correct Answer: B QUESTION 77 If a switch within a spanning tree domain has its spanning tree protocol disabled: A. BPDUs from other switches in the spanning tree domain will be blocked. B. BPDUs from adjacent switches running spanning tree will pass through the switch. C. The switch will use topology change BPDUs to inform the other switches to alter theexisting active topology. D. None of these Correct Answer: B QUESTION 78 A routing protocol such as RIP, OSPF, or BGP must be enabled before a switch can perform IP routing. A. True B. False Correct Answer: B
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
100% Real Q&As | 100 Real Pass | CertBus.com QUESTION 79 Before ExtremeWare will route packets between VLANs, the following must be configured: A. B. C. D.
A valid IP address in each appropriate VLAN. IP forwarding must be enabled on the VLANs involved in IP routing. IP multinetting must be configured. None of these.
Correct Answer: AB QUESTION 80 What is the default value for the RIP routetimeout setting? A. B. C. D.
30 seconds 60 seconds 120 seconds 180 seconds
Correct Answer: D QUESTION 81 What is the default STP hello timer value? A. B. C. D.
2 seconds 5 seconds 10 seconds 20 seconds
Correct Answer: A QUESTION 82 After adding all VLANs to STPD s0 you are unable to move VLAN corporate to STPD s1. What steps must you take for this to happen? A. Delete all ports associated with VLAN corporate, add VLAN corporate to STPD s1,add all necessary ports to VLAN corporate. B. Delete all ports associated with VLAN corporate, add VLAN corporate to STPD s1,reboot the switch, add all necessary ports to VLAN corporate. C. Disable STP for VLAN corporate, add it to STPD s1, and then enable STP for VLANcorporate. D. Disable STP for VLAN corporate, add it to STPD s1, reboot, then enable STP forVLAN corporate. Correct Answer: A QUESTION 83 What command is used to disable the learning of RIP routes on an interface? A. B. C. D.
disable rip learning configure rip rxmode none configure rip interface passive None of these.
Correct Answer: B QUESTION 84 Exhibit:
Contact Us: www.CertBus.com Get Success in Passing Your Certification Exam at first attempt
Why Select/Choose CertBus.com? Millions of interested professionals can touch the destination of success in exams by certbus.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material. • 7000+ Real Questions and Answers • 6000+ Free demo downloads available • 50+ Preparation Labs • 20+ Representatives Providing 24/7 Support
To Read the Whole Q&As, please purchase the Complete Version from Our website.
Trying our product ! ★ 100% Guaranteed Success ★ 100% Money Back Guarantee ★ 365 Days Free Update ★ Instant Download After Purchase ★ 24x7 Customer Support ★ Average 99.9% Success Rate ★ More than 69,000 Satisfied Customers Worldwide ★ Multi-Platform capabilities - Windows, Mac, Android, iPhone, iPod, iPad, Kindle
Need Help Please provide as much detail as possible so we can best assist you. To update a previously submitted ticket:
Guarantee & Policy | Privacy & Policy | Terms & Conditions Any charges made through this site will appear as Global Simulators Limited. All trademarks are the property of their respective owners. Copyright © 2004-2015, All Rights Reserved.
