300R Operating Instructions Power ON and OFF ON: Double press power button OFF: Press and hold power button for two seconds Steady lighting mode (Headlight default) When in standard mode, Press POWER button to change light intensity LOW power - Light is running at 25% power in LOW setting. MEDIUM power - Light is running at 50% power in MEDIUM setting. HIGH power -Light is running at 100% power in HIGH setting. Flash mode (Tail light default) Press POWER button to switch between each of the three flash modes.

Charge Indicators Charge In Progress

Please check local laws before using flash modes.

Charge Complete Slow pulse – Light is pulsing at a slow steady pace.

Steady light with strobe – Light is always on an ultra-low power setting with a high intensity pulse. USB Charge Port Strobe and pause Light is always on an ultra-low power setting with a repeated pattern of five high intensity strobes followed by a short pause.

Switching between Flash and Steady modes. Press and hold power button for six seconds. Headlight with indicate mode change. Follow power and control instructions above Low Battery Indication The head lamp will strobe briefly indicating approximately 20% of battery capacity remains

Charge battery fully before initial use. Charge indicator will be RED when battery is charging. Charge indicator will turn GREEN when battery is charged.

Light Output Comparison The 300R is brighter than the 140R The 300R is not quite as bright as the 400R 300R Advantages: (over other Dinotte taillights) No battery to mount - All one piece 400R mounting flexibility with a QUICK RELEASE

Single Light Run Times:

Charge Time:

4 Hours

4 Hours 100%

Charger Operating voltage: +5 V

8 Hours 50%

Weight Light Engine: (approx 120 grams)

16 Hours 25% 36 Hours Slow Pulse

Illuminated Area:

4.5" sq.

12 Hours Rapid Pulse 12 Hours Strobe

DiNotte Lighting USA, 1 Merrill Industrial Drive, Suite 10, Hampton NH, 03842 USA, (tel) 603 929 0123 email: [email protected] www.dinottelighting.com