Designer - Section G Duray Lighting 500 East Touhy Avenue, Suite F, Des Plaines, IL 60018 773-271-2800 www.duraylighting.com
Designer Section G
G1
Direct\Indirect
G16
DecoLume
G2
LP Series Linear
G17
Stilite
G3
SquareDeelite
G18
Vandal Resistant
G4
Directoray
G5
Big "D" Directoray
G6
Acrylic Round I
G7
Acrylic Round II
G8
Low Profile Round
G9
Acrylic Square
G10
Circline
G11
Cloudlume Wall Bracket
G12
MoreLite
G13
Big "D" Highliter
G14
Hanover
G15
CoraLume
Duray Lighting, Inc a Division of Weslite Inc. 500 E. Touhy Ave, Suite F, Des Plaines, IL 60018 | 7732712800 Office | 7732714410 Fax
[email protected]
Designer T8, T5, T5HO
Direct/Indirect Series SPECIFICATIONS HOUSING: Code gauge perforated steel sheet metal die formed and riveted construction. ELECTRICAL: Electronic ballast incorporating Class “P” thermal protection. 120 volts AC 60 Hz standard. Class “A” sound rating. Ballasts mounted in direct contact with housing for maximum heat dissipation. Socket completely wired. INSTALLATION: Chain link, aircraft cable or other suitable suspension hardware (by others). FINISH: Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester LABELS: U/L and I.B.E.W.
14.25
48.18
4.25
ORDERING INFORMATION:
Example DIR232-F
DIR
Series DIR
A Division of Weslite Inc.
No. of Lamps 1 - One Lamp 2 - Two lamps
500 E. Touhy Ave, Des Plaines, IL 60018
Lamp Type 40 - 2’, T5TT, 40W 54 - 2’, T5TT, 54W 28 - 4’, T5, 28W 54 - 4’, T5HO, 54W 105 - 4’, T5TT, 105W 32 - 4’, T8, 32W
Options B1—Battery Pack F—Fusing Y—Radio Interference filter Z—Plug-in wiring Specifications subject to change without notice.
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G1
Designer T8, T5, T5HO
LP Series—Linear SPECIFICATIONS HOUSING: A low profile suspended direct/indirect fixture housing for glare-free ambient lighting in offices, conference rooms, reception areas and classrooms. SHIELDING: Microperforated baffle with white opal acrylic inlay combines soft downlight with even ceiling illumination. ELECTRICAL: All units wired with ballast incorporation class P thermal protection,. Ballast mounted in direct contact with housing for maximum heat dissipation. INSTALLATION: Designed for pendant mounting, individually or in continuous rows. LABELS: U/L.
ORDERING INFORMATION: LP Options No. of Lamps Series
LP
A Division of Weslite Inc.
Lamp Type 32W, T8
1 - One lamp 2 - Two lamps 3 - Three lamps
500 E. Touhy Ave, Des Plaines, IL 60018
28W, T5 54W, T5, HO
T - Tandem Specifications subject to change without notice.
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G2
Designer
Square-Deelite Series Model Number White Enamel
Model Number Walnut-Grained Vinyl
WT6115-S
T6115-S
Model Number White Enamel
Model Number Walnut-Grained Vinyl
Number of Lamps
Ballast Type
Nominal Length
1-15W
SSB/T12
18¼”
Number of Lamps
Ballast Type
Nominal Length
WT6117
T6117
1-17W
SSB/T8
24¼”
WQ6125
Q6125
1-25W
SSB/T8
36¼”
WQ6132
Q6132
1-32W
SSB/T8
48¼”
WT6217
T6217
2-17W
SSB/T8
24¼”
WQ6225
Q6225
2-25W
SSB/T8
36¼”
WQ6232
Q6232
2-32W
SSB/T8
48¼”
Electronic T12 & T8/SSB
For flat white acrylic diffuser, suffix catalog number with “MW.” Code G K M R B1
OPTIONS & ACCESSORIES Description Code Description night light MW (suffix) smooth white plastic grounded convenience outlet WD walnut grain vinyl on metal– front baffle turn knob WWD white front baffle pull chain 6200 coupler for continuous rows emergency battery pack
SPECIFICATIONS HOUSING: Entire construction rigidly die-formed of code gauge steel. SHIELDING: Choice of acrylic prismatic or acrylic white diffuser for soft & even glare-free illumination. Easily installed and removed. FINISH: All metal parts are cleansed by a multi -stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired and mounted. INSTALLATION: Units may be surface mounted, individually or in continuous rows. For continuous row installation, specify number of fixtures per row. LABELS: U/L and I.B.E.W.
Square-Deelite end view
Acrylic prismatic diffuser
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G3
Designer Electronic T12 & T8/SSB
Directoray Model Number White Enamel
Model Number Walnut-Grained Vinyl Ends
Number of Ballast Lamps Type
Nominal Length
WHOT6217
HOT6217
2-17W
T8/SSB
24¼”
WHOQH6225
HOQH6225
2-25W
T8/SSB
36¼”
WHOQH6232
HOQH6232
2-32W
T8/SSB
48¼”
Code G M R
OPTIONS & ACCESSORIES Description night light night light switch (turn knob) night light switch (pull chain)
FEATURES
Upward control for soft indirect room lighting
Downward control for reading
Two-circuit pull chain switch– upward, downward, upward/downward, off (standard) 30 WATT
SPECIFICATIONS HOUSING: Channel and cover are heavy gauge steel. FRONT BAFFLE: White or walnut grained vinyl-on metal which slides in place and is secured by end plates. SHIELDING: Acrylic prismatic diffuser for soft and even glare-free illumination. Easily installed and removed.
20 WATT
7/8” KNOCKOUTS
FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating for improved paint adhesion and rust resistance. ELECTRICAL: All units wired with "A" sound rated ballasts, incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. Two circuit pull chain switch, standard. INSTALLATION: Units may be surface mounted. LABELS: U/L combined with I.B.E.W. LAMP-DIVIDERSHIELD CONTROLS UPWARD AND DOWNWARD DIRECTION OF LIGHT
ACRYLIC PRISMATIC DIFFUSER
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G4
Designer Electronic T8/SSB
Big “D” Directoray Model Number White Enamel
Model Number Walnut-Grained Vinyl
Number of Ballast Lamps Type
Nominal Length
WHOQH 6325 HOQH 6325
3-25W
SSB/T8
36-1/4"
WHOQH 6332 HOQH 6332
3-32W
SSB/T8
48-1/4"
WHOQH 6425 HOQH 6425
4-25W
SSB/T8
36-1/4"
WHOQH 6432 HOQH 6432
4-32W
SSB/T8
48-1/4"
Code G K M R
OPTIONS & ACCESSORIES Description night light grounded convenience outlet night light switch (turn knob) night light switch (pull chain)
SPECIFICATIONS HOUSING: Channel and cover are heavy gauge white enamel steel. SHIELDING: Acrylic prismatic diffuser for soft and even glare-free illumination. Easily installed and removed. FRONT BAFFLE: Slides in place and is secured by end plates. FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating for improved paint adhesion and rust resistance. ELECTRICAL: All units wired with "A" sound rated ballasts, incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired and mounted. Two circuit pull chain switch, standard. INSTALLATION: Units may be surface mounted. LABELS: U/L combined with I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G5
Designer Twin Tube
Acrylic Round I Series Model Number
Number of Lamps
Ballast Type
Housing Diameter
PA1019
1-PL9
RS/LPF
10"
PA1029
2-PL9
RS/LPF
10"
PA1013
1-PL13
RS/LPF
10"
PA1319
1-PL9
RS/LPF
12¾"
PA1329
2-PL9
RS/LPF
12¾"
PA1339
3-PL9
RS/LPF
12¾"
PA1313
1-PL13
RS/LPF
12¾"
PA13213
2-PL13
RS/LPF
12¾"
PA13213-S
2-PL13
SSB
12¾"
PA13226-S
2-QUAD 26
SSB
12¾"
PA17313-S
3-PL13
SSB
17”
PA17326-S
3-QUAD 26
SSB
17”
Code S (prefix) M (prefix) POLY S
OPTIONS & ACCESSORIES Description Saucer style plastic Mushroom style plastic Polycarbonate lens (standard style only) SSB (Electronic)
STANDARD STYLE
SPECIFICATIONS HOUSING: Is of sturdy construction, finished in high reflectance post painted white enamel for superior durability and lighting performance. Features an ultra shallow backplate with simple twist-on diffuser mounting with no hardware visible. Units have white finished mounting pans and retaining screws for diffuser support. SHIELDING: Featuring a white translucent, seamless diffuser molded of cast acrylic material. FINISH: All metal parts are cleansed by a multi -stage process and treated with an electrostatically sprayed white enamel baked at 320° F. Minimum of 90% reflectivity. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. LABELS: U/L and I.B.E.W.
SAUCER STYLE
MUSHROOM STYLE
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G6
Designer Circline
Acrylic Round II Series Model Number
Number of Lamps
Ballast Type
Housing Diameter
PA22-S
1-22W
SSB
10”
PA32-S
1-32W
SSB
12¾"
PA40-S
1-40W
SSB
17”
PA54-S
1-22W,1-32W
SSB
12¾”
PA72-S
1-32W, 1-40W
SSB
17”
OPTIONS & ACCESSORIES Code
Description
S (prefix)
Saucer style plastic
M (prefix)
Mushroom style plastic
POLY
Polycarbonate lens (standard style only)
S
SSB (electronic)
SPECIFICATIONS HOUSING: Is of sturdy construction, finished in high reflectance post painted white enamel for superior durability and lighting performance. Features an ultra shallow backplate with simple twist-on diffuser mounting with no hardware visible. Units have white finished mounting pans and retaining screws for diffuser support.
STANDARD STYLE
SHIELDING: Featuring a white translucent, seamless diffuser molded of cast acrylic material. FINISH: All metal parts are cleansed by a multi -stage process and treated with an electrostatically sprayed white enamel baked at 320° F. Minimum of 90% reflectivity. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. LABELS: U/L and I.B.E.W.
SAUCER STYLE
MUSHROOM STYLE
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G7
Designer Twin Tube & Circline
Low Profile Round Series This attractive fixture series consists of a housing which is stamped and spun, creating a floating effect on the mounting surface. This effect is further reinforced with the utilization of a shallow dome diffuser, in either white or clear prismatic. The diffusers mount to the fixture housing with the use of three spring clips, which compress the flange on the diffuser inside the fixture housing. The diffusers are constructed of 50% acrylic and 50% DR acrylic to allow the ease of mounting and accessibility of the diffuser to the housing.
Size
A
B
C
D
Lamping Options
13”
11-7/8”
9-7/16”
12-13/16”
3”
1 or 2 PL-13/22w circline
17”
15-3/8”
13”
16”
3-5/8”
2 or 3 PL 13/2232w circline
21”
19-5/8”
17”
20-11/16”
4”
32-40 w circline
ORDERING INFORMATION Series LPR
Housing Size (in inches) 13 16 21
A Division of Weslite Inc.
Example LPR13213NW-W
Lamp Configuration
Housing Finish
22 - (1) 22 watt 113 - (1) PL13 213 - (2) PL13 313 - (3) PL13 54 - (1) 22 watt and (1) 32 watt
N - Polished Nickel W - White B - Polished Brass
500 E. Touhy Ave, Des Plaines, IL 60018
-
Diffuser Options W - White acrylic P - Prismatic acrylic
Ballast Options S - SSB
Specifications subject to change without notice.
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G8
Designer RS, LPF, Electronic SSB
Acrylic Square Series Model Number
Number of Lamps
Ballast Dimension Dimension Dimension Type A B C
WPC22-S
1-22W
SSB
12"
10-7/8”
2-5/8”
WPC32-S
1-32W
SSB
14-1/2"
13-1/16”
2-3/4”
WPC54-S
1-22W & SSB 1-32W
14-1/2"
13-1/16”
2-3/4”
WPC72-S
1-32W & SSB 1-40W
19-1/2"
18-1/4”
2-7/8”
SPECIFICATIONS HOUSING: Is of sturdy construction, finished in high reflectance post painted white enamel for superior durability and lighting performance. Features an ultra shallow backplate with simple latching system for easy servicing, no tools required. FINISH: All metal parts are cleansed by a multi-stage process and treated with an electrostatically sprayed white enamel baked at 320ºF. Minimum of 90% reflectivity. SHIELDING: Featuring a white translucent, seamless diffuser molded of extruded acrylic material. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. LABELS: U/L and I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G9
Designer Electronic RS, LPF, SSB
Circline Series MODEL NUMBER
BALLAST TYPE
DIAMETER
1-22W
RS, LPF
8”
…...
1-32W
SSB
12”
…...
1-22W, 1-32W
SSB
12”
WHITE
CHROME
W22
…...
W32-S W54-S
NUMBER OF LAMPS
SPECIFICATIONS HOUSING: Entire construction is of code gauge die formed steel. FINISH: For improved paint adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating. HARDWARE: All hardware furnished for simple mounting to existing outlet boxes. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Surface mounted only. LABELS: U/L combined with I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G10
Designer ElectronicT5, T8 & T12/SSB
Cloudlume Wall Bracket SPECIFICATIONS HOUSING: Body is die-formed of code gauge steel construction and uniformity. SHIELDING: Lenses are formed white acrylic. FINISH: All metal parts are cleansed by a multi stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320ºF. Minimum of 88% reflectivity. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt 60 cycle AC. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: individually.
Units may be surface mounted,
LABELS: U/L.
ORDERING INFORMATION: Example CB114-W CB
Lamp Type No. of
Series CB
1 - Lamp 2 - Two lamps
14 - 14watt, SSB,T5 21 - 21watt SSB,T5 28 - 28watt, SSB,T5 17 - 17 watt, SSB,T8 25 - 25 watt, SSB,T8 32 - 32 watt, SSB,T8 20 - S - 20 watt, SSB,T12 30 - S - 30 watt, SSB,T12 40 - S - 40 watt, SSB,T12
Options B1 - Emergency battery pack W - 277 Voltage
Nominal Size
Opening
6” x 26-3/4”
4-5/8”x24-1/4”
6” x 26-3/4”
4-5/8”x24-1/4”
6” x 38-3/4”
4-5/8”x36-1/4”
6” x 38-3/4”
4-5/8”x36-1/4”
6” x 50-3/4”
4-5/8”x48-1/4”
6” x 50-3/4”
4-5/8”x48-1/4”
Specifications subject to change without notice. A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G11
Designer Electronic T8 & T12/SSB
More-Lite Series Model Number
Number of Lamps
Ballast Type
Nominal Length
White
Chrome
WT9015-S
T9015-S
1-15W
SSB/T12
18¼”
WT9017
T9017
1-17W
SSB/T8
24¼”
WT9020-S
T9020-S
1-20W
SSB/T12
24¼”
WT9215-S
T9215-S
2-15W
SSB/T12
18¼”
WT9217
T9217
2-17W
SSB/T8
24¼”
WT9220-S
T9220-S
2-20W
SSB/T12
24¼”
WQ9225
Q9225
2-25W
SSB/T8
36¼”
WQ9232
Q9232
2-32W
SSB/T8
48¼”
2-7/8” K.O. on all brackets.
1-7/8” K.O.
OPTIONS & ACCESSORIES (Accessories rated for use with 120 volt ballast only.) Code
Description
9200
Coupler for continuous rows
B1
Emergency battery pack
K
Grounded convenience outlet
M
Turn knob switch
R
Pull chain switch
3
1-1/16”
3½”
3
/16”
/16” MTG.
SPECIFICATIONS HOUSING: Entire construction rigidly die formed code gauge steel. SHIELDING: One piece white acrylic diffuser for soft and even glare-free illumination. Easily installed and removable for re-lamping.
DIFFUSER SMOOTH WHITE VIRGIN ACRYLIC
FINISH: All reflecting metal parts are cleansed by a multi -stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320° F. Minimum, of 88% reflectivity. Exposed metal parts are finished in a lustrous, rustresistant mirror-like chromium. ELECTRICAL: All units wired with ballasts incorporating class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
5- 3/16”
3- 5/16”
INSTALLATION: Units may be surface mounted, individually or in continuous rows. LABELS: U/L listed combined with I.B.E.W.
3– 3/16”
3– 13/16”
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G12
Designer Electronic T8/SSB
Big “D” Highlighter MODEL NUMBER Slotted Top Solid Top
Number of Lamps
Ballast Type
Nominal Length
H5117
H3117
1-17W
SSB/T8
24-3/8”
H5125
H3125
1-25W
SSB/T8
36-3/8”
H5132
H3132
1-32W
SSB/T8
48-3/8”
H5217
H3217
2-17W
SSB/T8
24-3/8”
H5225
H3225
2-25W
SSB/T8
36-3/8”
H5232
H3232
2-32W
SSB/T8
48-3/8”
New
Model Number
Description
H3232-M-2B
2 lamps switched individually with 2 circuit turn knob switch offering flexibility of high and low light levels
6-7/8"
Accessories Model Number
Description
K
convenience outlet
N
rocker switch
1-13/16" 2-7/8"
END
Diffuser Snaps
SPECIFICATIONS HOUSING: Entire construction rigidly die-formed of code gauge steel. Aperture top for soft indirect lighting.
TOP 3/16" Mounting Holes
SHIELDING: One-piece, .125 light-stabilized, virgin acrylic, prismatic diffuser for soft and even glare-free illumination. Easily installed and removed. FINISH: All metal parts are cleansed by a multi -stage process and treated with an iron phosphate coating after fabrication to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. ELECTRICAL: All units wired with A sound rated ballasts, incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballast mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired and mounted. INSTALLATION: Units may be surface or wall mounted, individually or in continuous rows. LABELS: U/L listed combined with I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
EN
7/8" K.O.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G13
7/8"
Designer Electronic T8 & T12/SSB
Hanover Model Number WHITE
CHROME
Number of Lamps
Ballast Type
Nominal Length
WT9115-S
T9115-S
1-15W
SSB/T12
18¼”
WT9117
T9117
1-17W
SSB/T8
24¼”
WT9120-S
T9120-S
1-20W
SSB/T12
24¼”
WQ9125
Q9125
1-25W
SSB/T8
36¼”
WQ9130-S
Q9130-S
1-30W
SSB/T12
36¼”
WQ9132
Q9132
1-332W
SSB/T8
48¼”
WQ9140-S
Q9140-S
1-40W
SSB/T12
48¼”
OPTIONS & ACCESSORIES Code
Description
9100
Coupler for continuous rows
K
Grounded convenience outlet
W (suffix)
277 volt
M
Turn knob switch
B1
Emergency battery pack
S
Electronic ballast
BACK
Accessories rated for use with 120 volt ballast only.
SPECIFICATIONS HOUSING: Entire construction is of die-formed code gauge steel. SHIELDING: One piece ribbed white acrylic diffuser for soft and even glare-free illumination. Easily removable for re-lamping.
END
¾ DIA. K.O.
FINISH: All reflecting metal parts are cleansed by a multi -stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320° F. Minimum, of 88% reflectivity. Exposed metal parts are finished in a lustrous, rust-resistant mirror-like chromium. ELECTRICAL: All units wired with ballasts incorporating class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Units may be surface mounted, individually or in continuous rows. LABELS: U/L listed combined with I.B.E.W.
1-1/8 SQ. 3 WIRE C.O. EACH END
DIFFUSER SIZE
LENGTH
14W
15¼”
15W
18¼”
20W
24¼”
30W
36¼”
40W
48¼”
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G14
Designer Electronic T8 &T12/SSB, HO
Cora Lume T8 Electronic Model Number
Number of Lamps
Ballast Type
Nominal Length
1-17W 2-17W 1-25W 2-25W 1-32W 2-32W
SSB/T8 SSB/T8 SSB/T8 SSB/T8 SSB/T8 SSB/T8
2’ 2’ 3’ 3’ 4’ 4’
CL117 CL217 CL125 CL225 CL132 CL232
T8 &T12 High Output Model Number
Number of Lamps
Ballast Type
Nominal Length
CL248-8-S
2-60W
SSB/T12 HO
4’
CL244-8
2-44W
SSB/T8 HO
4’
Note: 3 lamp models may be available on special order. Consult factory.
Options & Accessories Model Number B1
Description Emergency Battery Pack
SPECIFICATIONS HOUSING: Die formed of code gauge steel. SHIELDING: Standard lens is flat prismatic acrylic .125. Other lenses available on request. FINISH: High reflective baked white enamel. ELECTRICAL: All units with ballasts incorporating class P thermal protection, for 120 volt, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. INSTALLATION: Surface mounted, individually or in continuous rows. LABELS: U/L and I.B.E.W.
(6) 3/8” DIA HOLES Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G15
Designer Electronic T12 & T8 /SSB
Deco-Lume Model Number
Number of Lamps
Ballast Type
Nominal Length
WT8115-S
1-15W
SSB/T12
18¼”
WT8120-S
1-20W
SSB/T12
24¼”
WQ8130-S
1-30W
SSB/T12
36¼”
WQ8140-S
1-40W
SSB/T12
48¼”
Model Number
Number of Lamps
Ballast Type
Nominal Length
1-17W 1-25W
SSB/T8 SSB/T8
24¼” 36¼”
1-32W
SSB/T8
48¼”
WTH8117 WQH8125 WQH8132
Options & Accessories Model Number B1
Description Emergency Battery Pack
SPECIFICATIONS
2½”
HOUSING: Entire construction rigidly die-formed of code gauge steel. SHIELDING: Acrylic white diffuser for soft and even glare-free illumination. Easily installed and removable for re-lamping. FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity.
4¼”
ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Units may be surface mounted, individually or in continuous rows. Specify number of fixtures per row when installed in continuous rows.
BACK
LABELS: U/L listed combined with I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G16
Designer Electronic T12 & T8/SSB
Stilite T12 Electronic Model Number
Number of Lamps
Ballast Type
Nominal Length
1-15W 1-20W 2-15W 2-20W
T12/SSB T12/SSB T12/SSB T12/SSB
18¼” 24¼” 18¼” 24¼”
Number of Lamps
Ballast Type
Nominal Length
T7117
1-17W
T8/SSB
24¼”
T7217
2-17W
T8/SSB
24¼”
Q7125
1-25W
T8/SSB
36¼”
Q7225
2-25W
T8/SSB
36¼”
Q7132
1-32W
T8/SSB
48¼”
Q7232
2-32W
T8/SSB
48¼”
T7115-S T7120-S T7215-S T7220-S
T8 Electronic Model Number
1 & 2 LIGHTS WITH SMOOTH WHITE ACRYLIC PLASTIC DIFFUSER
For chrome finish, prefix model number with “C.” OPTIONS & ACCESSORIES
Code K R B1
Description grounded convenience outlet pull chain emergency battery pack
Accessories rated for use with 120 volt ballast only.
SPECIFICATIONS HOUSING: Entire construction rigidly die-formed of code gauge steel. SHIELDING: Acrylic white diffuser for soft and even glare-free illumination. Easily installed and removable for re-lamping. FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 320°F. Minimum of 88% reflectivity. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Units may be surface mounted, individually or in continuous rows. Specify number of fixtures per row when installed in continuous rows. LABELS: U/L listed combined with I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G17
Designer Dimensional Data
Stilite 1 & 2 LIGHTS WITH SMOOTH WHITE ACRYLIC PLASTIC DIFFUSER
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410
Utility Electronic T8/SSB
Vandal Resistant Series Catalog Number
Lamp
Ballast Type
Nominal Length
VRH6117
1-17W
T8/SSB
24-1/4”
VR6125
1-25W
T8/SSB
36-1/4”
VR6132
1-32W
T8/SSB
48-1/4”
VRH6217
2-17W
T8/SSB
24-1/4”
VR6225
2-25W
T8/SSB
36-1/4”
VR6232
2-32W
T8/SSB
48-1/4”
SPECIFICATIONS HOUSING: Channel and cover are heavy gauge steel. SHIELDING: illumination.
Polycarbonate prismatic diffuser for soft and even glare-free
ENDS: Fastened with (3) tamperproof screws. FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating for improved paint adhesion and rust resistance. ELECTRICAL: All units wired with "A" sound rated ballasts, incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
DIFFUSER
END
2-5/8”
4-3/8”
INSTALLATION: Units may be surface mounted.
4-1/2”
4-1/2”
LABELS: U/L combined with I.B.E.W.
(4) 5/16” DIA KO 1-1/8”
(8) 3/16” DIA
Ground
(2) 7/8” DIA KO
3/16” DIA WIDE by 3/8” LONG KO (2)
BACK
SIDE
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
G18
