Industrial - Section A Duray Lighting 500 East Touhy Avenue, Suite F, Des Plaines, IL 60018 773-271-2800 www.duraylighting.com
Industrial Section A A1
1200
A2
1300
A3
1300 T5
A4
1400
A5
1600
A6
1800
Duray Lighting, Inc a Division of Weslite Inc. 500 E. Touhy Ave, Suite F, Des Plaines, IL 60018 | 7732712800 Office | 7732714410 Fax
[email protected]
Industrial HO, VHO Electronic T8 & T12/SSB
1200 Series T12 Electronic MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
NUMBER OF LAMPS
BALLAST TYPE
NOMINAL LENGTH IN FEET
A1248-8-S
U1248-8-S
2-60W
SSB/T12
4
A1272-S
---------
2-55W
SSB/T12
6
A1272-8-S
---------
2-85W
SSB/T12
6
A1196-8-S
U1196-8-S
1-105W
SSB/T12
8
A1196-8T-S
U1196-8T-S
2-105W
SSB/T12
16
A1296-S
U1296-S
2-75W
SSB/T12
8
A1296-8-S
U1296-8-S
2-105W
SSB/T12
8
A1196-15-S
U1196-15-S
1-215W
SSB/T12
8
T8 Electronic MODEL # WHITE ENAMEL REFELCTOR Solid A1159 A1259 A1244-8 A1286-8
MODEL # WHITE ENAMEL REFELCTOR Uplight U1159 U1259 U1244-8 U1286-8
NOMINAL NUMBER OF BALLAST TYPE LENGTH IN LAMPS FEET 1-59W 2-59W 2-44W 2-86W
SSB/T8 SSB/T8 SSB/T8/HO SSB/T8/HO
8 8 4 8
SLIMLINE, HIGH OUTPUT MODELS
SPECIFICATIONS: HOUSING: Channel die formed of code gauge steel. Dual purpose end act as coupler for continuous row mounting. All chassis components snap into place without screws in most models.
11"
REFLECTOR: One piece, die formed and cross-ribbed for added rigidity. 10% uplight optional. FINISH: Housing and reflector baked at 375º in hi-reflective white enamel. ELECTRICAL: All units with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows. 4¼”
LABELS: U/L combined with I.B.E.W. label.
6”
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
1Phone 773-271-2800
Fax 773.271.4410 www.DurayLighting.com
A1
Industrial TS/LPF, RS/HPF T8 Electronic
1300 Series MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
NUMBER OF LAMPS
BALLAST TYPE
NOMINAL LENGTH IN FEET
T1321
———
1-20 W
TS, LPF
2
TH1321
———
1-20 W
RS,HPF
2
T1322
———
2-20 W
TS, LPF
2
TH1322
———
2-20 W
RS, HPF
2
Q1301
U1301
1-40 W
RS, LPF
4
Q1301T
U1301T
2-40 W
RS, HPF
8
Q1302
U1302
2-40 W
RS, HPF
4
Q1302CW
———
2-40 W
RS, HPF, CW
4
Q1302T
U1302T
4-40 W
RS, HPF
8
*T indicates tandem. CW indicates for temperature of 0° F.
T8 Electronic MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
Q13132 Q13132T Q13232 Q13232T Q13332 Q13332T
NUMBER OF LAMPS
U13132 U13132T U13232 U13232T U13332 U13332T
1-32 W 2-32 W 2-32 W 4-32 W 3-32 W 6-32 W
BALLAST TYPE
SSB/T8 SSB/T8 SSB/T8 SSB/T8 SSB/T8 SSB/T8
NOMINAL LENGTH IN FEET 4 8 4 8 4 8
*T indicates tandem. Prefix catalog number with SR when ordering fixture with aluminum reflector. Consult factory for reflector specifications. OPTIONS Code
Description
B1
Battery Pack
HLO (prefix)
High lumen output ballast (for 4’ T8 only)
W
277 volt
WG11
11” wireguard
Specifications: Housing: Channel die formed of code gauge steel. Dual -purpose end plates act as coupler for continuous row mounting. All chassis components snap into place without screws. Reflector: white enamel reflector 48” long, die formed and cross-ribbed for added rigidity. 10% uplite is optional. Only one fastener secures reflector; other side slides into position. Electrical: All units wired with ballasts incorporating Class P thermal protection for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. Installation: Units may be surface or pendant mounted, individually or in continuous rows. Labels: U/L combined with I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
1Phone 773-271-2800
Fax 773.271.4410 www.DurayLighting.com
A2
Industrial T5 & T5/HO
1300 Series T5 MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
NUMBER OF LAMPS
BALLAST TYPE
NOMINAL LENGTH IN FEET
T1314
Not available
1-14 W
ELECT.T5
2
Q13128
U13128
2-28 W
ELECT.T5
4
Q13228
U13228
2-28 W
ELECT.T5
4
Q13328
U13328
3-28 W
ELECT.T5
4
Q13228T
U13228T
4-28 W
ELECT.T5
8
Q13328T
U13328T
6-28 W
ELECT.T5
8
T5 HO
MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
T13224 Q13154 Q13254 Q13354 Q13254T Q13354T
NUMBER OF LAMPS
Not available U13154 U13254 U13354 U13254T U13354T
2-24 W 1-54 W 2-54 W 3-54 W 4-54 W 6-54 W
BALLAST TYPE
ELECT. T5/HO ELECT. T5/HO ELECT. T5/HO ELECT. T5/HO ELECT. T5/HO ELECT. T5/HO
NOMINAL LENGTH IN FEET 2 4 4 4 8 8
OPTIONS Consult factory for options
SPECIFICATIONS Housing: Channel die formed of code gauge steel. Dual -purpose end plates act as coupler for continuous row mounting. All chassis components snap into place without screws. Reflector: white enamel reflector 48” long, die formed and cross-ribbed for added rigidity. 10% uplite is optional. Only one fastener secures reflector; other side slides into position. Electrical: All units wired with ballasts incorporating Class P thermal protection for universal voltage, 50/60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. Installation: Units may be surface or pendant mounted, individually or in continuous rows. Labels: U/L.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
1Phone 773-271-2800
Fax 773.271.4410 www.DurayLighting.com
A3
Industrial RS/HPF T8 Electronic
1400 Series MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
NUMBER OF LAMPS
BALLAST TYPE
NOMINAL LENGTH IN FEET
Q1402
U1402
2-40 W
RS,HPF
4
Q1402T
U1402T
4-40 W
RS,HPF
8
Q1402CW
U1402CW
2-40 W
RS,HPF
4
Q1403
U1403
3-40 W
RS, HPF
4
Q1403T
U1403T
6-40 W
RS, HPF
8
Q1404
U1404
4-40 W
RS, HPF
4
Q1404T
U1404T
8-40 W
RS, HPF
8
*T indicates tandem. CW indicates for temperature of 0° F.
T8 Electronic MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
Q140232 Q140332 Q140432
NUMBER OF LAMPS
U140232 U140332 U140432
2-32 W 3-32 W 4-32 W
BALLAST TYPE
NOMINAL LENGTH IN FEET
SSB/T8 SSB/T8 SSB/T8
4 4 4
Prefix catalog number with SR when ordering fixture with aluminum reflector. Consult factory for reflector specifications. OPTIONS Code
Description
B1
Battery Pack
F
Fusing
HLO (suffix)
High lumen output ballast (for 4’ T8 only)
PDFA
Prismatic Diffuser Frame
PVR
Parabolic Longitudinal Vee Reflector—/provides 30° Lateral Shielding—4’ long
RE
Reflector ends—to be used only with individual units or at end of rows
SGH
Slide Grip Hanger—complete with stove bolt and fastener
W
277 volt
WG13
13” wireguard
SPECIFICATIONS HOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity. Dual purpose end plates act as a coupler for continuous row mounting. Socket plates snap into place without screws. REFLECTOR: 48” long, die formed, cross-ribbed and double embossed for added rigidity. 15% uplite slotting is optional. Fastens without tools to channel by two captive turn latches. FINISH: Housing and reflector treated with a rust inhibitor in a five stage process prior to electrostatic finish at 375º in baked white enamel. Provides minimum reflectance of 90%. ELECTRCAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows. LABELS: U/L combined with I.B.E.W. label. Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
1Phone 773-271-2800
Fax 773.271.4410 www.DurayLighting.com
A4
Industrial RS,HPF T8 /SSB
1600 Series MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
NUMBER OF LAMPS
BALLAST TYPE
NOMINAL LENGTH IN FEET
Q1602
U1602
2-40 W
RS,HPF
4
Q1602T
U1602T
4-40 W
RS,HPF
8
Q1602CW
U1602CW
2-40 W
RS,HPF
4
Q1603
U1603
3-40 W
RS, HPF
4
Q1603T
U1603T
6-40 W
RS, HPF
8
Q1604
U1604
4-40 W
RS, HPF
4
Q1604T
U1604T
8-40 W
RS, HPF
8
*T indicates tandem. CW indicates for temperature of 0° F.
T8 Electronic MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
Q16232 Q16232T Q16232CW Q16332 Q16332T Q16432 Q16432T
U16232 U16232T U16232CW U16332 U16332T U16432 U16432T
NUMBER OF LAMPS 2-32 W 4-32 W 2-32 W 3-32 W 6-32 W 4-32 W 8-32 W
BALLAST TYPE
NOMINAL LENGTH IN FEET
SSB/T8 SSB/T8 SSB/T8 SSB/T8 SSB/T8 SSB/T8 SSB/T8
4 8 4 4 8 4 8
OPTIONS Code
Description
B1
Battery Pack
F
Fusing
HLO (suffix)
High lumen output ballast (for 4’ T8 only)
PVR
Parabolic Longitudinal Vee Reflector—/provides 30° Lateral Shielding—4’ long
SGH
Slide Grip Hanger—complete with stove bolt and fastener
TBH
T-bar hangers for slimline/rapid start
W
277 volt
WG13
13” wireguard
SPECIFICATIONS HOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity. Dual purpose end plates act as coupler for continuous row mounting. Socket plates snap into place without screws. REFLECTOR: 48” long, die formed, cross-ribbed and double embossed for added rigidity. 15% uplite slotting is optional. Fastens without tools to channel by two captive turn latches. FINISH: All metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 375ºF. Minimum of 88% reflectivity. ELECTRICAL: All units wired with ballasts incorporating Class P thermal protection, for 120 volt, 60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Turret sockets completely wired. INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows. LABELS: U/L combined with I.B.E.W. label. Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
1Phone 773-271-2800
Fax 773.271.4410 www.DurayLighting.com
A5
Industrial Slimline & HO T12 / T8 Electronic
1800 Series T12 Electronic MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
A1882-S
U1882-S
2-75W
Electronic T12
8
A1883-S
U1883-S
3-75W
Electronic T12
8
A1884-S
U1884-S
4-75W
Electronic T12
8
A1882-8-S
U1882-8-S
2-105W
Electronic T12
8
A1883-8-S
U1883-8-S
3-105W
Electronic T12
8
A1884-8-S
U1884-8-S
4-105W
Electronic T12
8
NUMBER OF LAMPS
BALLAST TYPE
NOMINAL LENGTH IN FEET
T8 Electronic MODEL # WHITE ENAMEL REFELCTOR Solid
MODEL # WHITE ENAMEL REFELCTOR Uplight
A188259-S
U188259-S
2-59W
Electronic T8
8
A188359-S
U188359-S
3-59W
Electronic T8
8
A188459-S
U188459-S
4-59W
Electronic T8
8
A188286-8-S
U188286-8-S
2-86W
Electronic T8
8
A188386-8-S
U188386-8-S
3-86W
Electronic T8
8
A188486-8-S
U188486-8-S
4-86W
Electronic T8
8
NUMBER OF LAMPS
BALLAST TYPE
NOMINAL LENGTH IN FEET
*T indicates tandem. CW indicates for temperature of 0° F. Other lamp and ballast configurations available. Consult factory for details. OPTIONS Code
Description
F
Fusing
WG13
13” wireguard
SPECIFICATIONS HOUSING: Channel die formed of code gauge steel, reinforced by ribbing the entire length for extra rigidity. Dual purpose end plates act as a coupler for continuous row mounting. Socket plates snap into place without screws. REFLECTOR: 48” long, die formed, cross-ribbed and double embossed for added rigidity. 15% uplite slotting is optional. Fastens without tools to channel by two captive turn latches.
FINISH: All metal parts are cleansed by a multi -stage process and treated with an iron phosphate coating to improve paint adhesion and rust resistance, then electrostatically sprayed with white enamel and baked at 375ºF. Minimum of 88% reflectivity.
4 LIGHT
ELECTRICAL: All units w ired w ith ballasts incorporating Class P thermal protection, for universal voltage 50/60 cycle AC current. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Turret sockets completely wired. INSTALLATION: Units may be surface or pendant mounted, individually or in continuous rows. LABELS: U/L. Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
1Phone 773-271-2800
Fax 773.271.4410 www.DurayLighting.com
A6