Electric Circuits Sheet 2 1- For the circuit shown, and using Ohm's Law a) If vg = 1 kV and ig = 5 mA, find the value of R and the power absorbed by the resistor. b) If ig = 75 mA and the power delivered by the voltage source is 3 W, find vg, R, and the power absorbed by the resistor. c) If R= 300 Ω and the power absorbed by R is 480 mW, find ig and vg. Answer: (a) 200kΩ, 5W;
(b) 40 V, 533.33 Ω, 3 W; (c) 40 mA, 12 V
2- For the circuit shown, and using Ohm's Law a) If ig = 0.5 A and G = 50 mS, find vg and the power delivered by the current source. b) If vg = 15 V and the power delivered to the conductor is 9 W, find the conductance G and the source current ig. c) If G = 200 µS and the power delivered to the conductance is 8 W, find ig and vg. Answer: (a)10V,5 W;(b) 40mS,0.6 A;(c) 40 mA, 200 V.
3- The terminal voltage and terminal current were measured on the device shown in Fig. (a ) The values of v and i are given in the table of Fig. (b). Use the values in the table to construct a circuit model for the device consisting of a single resistor..
3- The terminal voltage and terminal current were measured on the device shown in Fig. (a ). The values of v and i are given in the table of Fig. (b). Use the values in the table to construct a circuit model for the device consisting of a single resistor..
Download Principles of Electric Circuits: Conventional Current Version ... surely announce when the final version of iOS 11 will be officially available iOS 11.
Calibration of single phase energy meter. 12. Determination of two port network parameters. Total: 45 Periods. Visit : www.EasyEngineering.net. www.EasyEngineering.net. Page 3 of 61. EE6211-ELECTRIC-CIRCUITS-LABORATORY- By EasyEngineering.net.pdf. EE