Second International Conference on Engineering Science – 2​nd​ ICES University of Kerbala- Engineering College Publishing Ethics - Guidelines and Policies GUIDELINES Authors must prepare their papers using Microsoft Word according to the IOP guidelines summarized as follows: 1.

Paper size is European A4.

2.

Margins are 4cm (top), 2.5cm (left and right) and 2.7cm (bottom).

3.

The paper includes the author name and affiliation (full address including country).

4.

There are no page numbers, or headers and footers, within the paper.

5.

The word file is free of formatting errors (e.g. corrupt equations, missing or low-resolution figures).

6.

Text is single spaced, ​not​ double spaced.

7.

The word file is editable and ​not​ password protected.

8.

All pages are portrait (landscape pages should be rotated).

9.

Reference lists are checked for accuracy.

10.

Figures are placed within the text, ​not​ collected at the end of the document.

11.

A thorough proofread is conducted to check the standard of English and ensure wording is clear and concise.

12.

Post-publication changes are not permitted, so authors must ensure that their papers have been checked for errors before final submission.

POLICY 1. The author warrants that the paper he/she is submitting is his/her original work, has not been published previously (other than in a research thesis or dissertation which fact has been notified to the conference organizer in writing).

2. All named authors participated sufficiently in the conception and writing of the paper, have received a final version of the paper, agree to its submission and take responsibility for it, and the submission has been approved as necessary by the authorities at the establishment where the research was carried out. 3. The author warrants that he/she acts on behalf of, and with the knowledge of, all authors of the paper, that the paper does not infringe any third-party rights, it contains nothing libelous, all factual statements are, to the best of the authors’ knowledge and belief, true or based on valid research conducted according to accepted norms, and all required permissions have been obtained. 4. All papers submitted to the conference will be examined using Turnitin in order to check for the similarity and plagiarism. If Turnitin report indicates more than 15 percent similarity and/or plagiarism the papers will be rejected. 5. The publication process will be divided into two phases: ▪

Phase-I: ​All papers will be subjected to a thorough scientific evaluation process conducted by the organizer (ICES). After completing evaluation process, the papers will be also subjected to proofreading process. This process involves checking for grammatical and punctuation errors, spelling mistakes, etc. The accepted papers after completing the scientific evaluation and proof reading processes will be submitted to the publisher (IOP).



Phase-II​: The publisher (IOP) will have the final decision on accepting or rejecting any paper selected in Phase-I. The papers accepted by the IOP will be published in the conference proceeding indexed in Scopus and Web of Science database.

The papers accepted in Phase-I, and rejected in Phase-II will be published in a special issue in the Journal of University of Kerbala. 6. Authors shall pay the organizer (ICES) 250000 IQD registration and publication fee after receiving a final acceptance letter from the organizer. This fee (250000 IQD) must be paid whether your paper is accepted in IOP or Journal of University of Kerbala.

Engineering College Publishing

The word file is editable and ​not​password protected. 8. All pages are portrait (landscape pages should be rotated). 9. Reference lists are checked for accuracy. 10. Figures are placed within the text, ​not​collected at the end of the document. 11. A thorough proofread is conducted to check the standard of English and ...

148KB Sizes 1 Downloads 348 Views

Recommend Documents

Srinivasan Engineering College Aeronautical Engineering ...
4. Explain the thermoforming process. 5. Explain induction and ultrasonic methods. 6. Explain working and principle of applications of. a. compression moulding. b. transfer moulding (16). Page 3 of 3. Main menu. Displaying Srinivasan Engineering Coll

IMS ENGINEERING COLLEGE
Dec 3, 2015 - between Lal Quan & ABES Engineering College, which sometimes extend for hours. All students of B.Tech & MBA are directed to start early.

Valliammai Engineering College Mechanical Engineering Sem 5 ...
be the minimum ultimate tensile strength of this part to carry this. fluctuation indefinitely according to (i) Goodman's formula (ii) Soderberg ... There was a problem loading this page. Retrying... Main menu. Displaying Valliammai Engineering Colleg

Valliammai Engineering College Civil Engineering CE2031-Water ...
Define Ecology. 19. ... Write down the advantages and disadvantages of recording type rain gauges. 20. ... List out any 4 data required for hydro meteorological studies? ... College Civil Engineering CE2031-Water Resources Engineering.pdf.

Kings Engineering College Mechanical Engineering Sem 8 ...
... system and push system. Page 3 of 4. Main menu. Displaying Kings Engineering College Mechanical Engineering Sem 8 Production Planning & Control.pdf.

Valliammai Engineering College Mechanical Engineering Sem 3 ...
Valliammai Engineering College Mechanical Engineering Sem 3 1744-Strength of Materials.pdf. Valliammai Engineering College Mechanical Engineering Sem ...

Kings Engineering College Mechanical Engineering Sem 8 ...
Give the merits of condition based maintenance. 4. ... What is meant by risk based maintenance ... Differentiate on load testing and off load testing. 6. ... Kings Engineering College Mechanical Engineering Sem 8 Maintenance Engineering.pdf.

Kings Engineering College Computer Science and Engineering ...
Kings Engineering College Computer Science and Engineering Sem 8 Information Security.pdf. Kings Engineering College Computer Science and Engineering ...

Kings Engineering College Electrical & Electronics Engineering ...
There was a problem previewing this document. Retrying... Download. Connect more apps... Try one of the apps below to open or edit this item. Main menu.

Valliammai Engineering College Mechanical Engineering Sem 1 ...
What is manufacturing cycle? 8. ... List the fundamental reasons for implementing a CAD system. 3. ... Give the general configuration of a CAD computer system and In what ways CAD can help ... Displaying Valliammai Engineering College Mechanical Engi

Sphoorthy Engineering College B.Tech Mechanical Engineering ...
b) A load of 5 kN is dropped from a height of 50 mm axially on the spring of a wire. of diameter 12 mm, spring index equal to 6 and the number of active coils as 8. Find the stresses induced in the spring. [8+7]. 6. Design a flat belt horizontal driv

Valliammai Engineering College Mechanical Engineering ME6302 ...
Valliammai Engineering College Mechanical Engineering ME6302-Manufacturing Technology-I.pdf. Valliammai Engineering College Mechanical Engineering ...

Kings Engineering College Electrical & Electronics Engineering ...
Page 1 of 23. EE 1354 MODERN CONTROL SYSTEMS. KINGS COLLEGE OF ENGINEERING, PUNALKULAM 1. KINGS. COLLEGE OF ENGINEERING. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING. QUESTION BANK. NAME OF THE SUBJECT: EE 1354 MODERN CONTROL SYSTEMS.

Kings Engineering College Computer Science and Engineering ...
Draw the protocol stack for SSL. 13. ... Displaying Kings Engineering College Computer Science and Engineering Sem 8 Network Protocols.pdf. Page 1 of 4.

Valliammai Engineering College Electrical & Electronics ...
Valliammai Engineering College Electrical & Electronics Engineering Sem 3 NE7007-Network Management.pdf. Valliammai Engineering College Electrical ...

college of engineering -
Recent Trends in Engineering & Technology. (ICRTET'2012) March 23rd ... Track 1: Computer Engineering and Information Technology. • Network & Information ...

Sree Chaitanya College Of Engineering
Dec 23, 2014 - OF BUSINESS. MANAGEMENT. FOR FURTHER DETAILS REQUIRED, IF ANY, PLEASE CONTACT: MOBILE. : +91 9490004582 | 99669 ...

Sree Chaitanya College Of Engineering
Dec 23, 2014 - Covert Advertisement. Retailing, Brand Architecture, Consumer Ethnocentrism. Other Emerging areas in Marketing Management. WHY. THIS.

college of engineering -
Recent Trends in Engineering & Technology. (ICRTET'2012) March 23rd to ... and Information Technology. • Network ... P. R. Bhaladhare,. Associate Professor &.

kongu engineering college -
KONGU ENGINEERING COLLEGE. (Autonomous). PERUNDURAI ERODE-638 060. OFFICE OF THE CONTROLLER OF EXAMINATIONS. Direct : 04294 ...

Publishing
Elsevier website at: http://www.elsevier.com/ ... The build-up of citations tends to .... 30 chemistry journals examined, 24 changed in rank by up to 11 positions ...

Kings Engineering College Civil Engineering Sem 4 Applied ...
Retrying... Whoops! There was a problem previewing this document. Retrying... Download. Connect more apps... Try one of the apps below to open or edit this item. Main menu. Whoops! There was a problem previewing Kings Engineering College Civil Engine

Easwari Engineering College B.E Civil Engineering Pre Fabricated ...
Easwari Engineering College B.E Civil Engineering Pre Fabricated Structures.pdf. Easwari Engineering College B.E Civil Engineering Pre Fabricated Structures.pdf. Open. Extract. Open with. Sign In. Main menu. Displaying Easwari Engineering College B.E

Publishing
Elsevier website at: http://www.elsevier.com/. For further ... The build-up of citations tends to follow a curve like ..... Professional journal types (such as those in ...