NATIONAL STOCK EXCHANGE OF INDIA LIMITED DEPARTMENT : CURRENCY DERIVATIVES Download Ref No : NSE/CD/29144

Date : March 16, 2015

Circular Ref. No : 006/2015 All Members, Mock trading from BCP/DR site on Saturday, March 21, 2015 Exchange shall be conducting a mock trading session on Saturday, March 21, 2015 from Primary and BCP site. The mock will be followed by a Re-Login session from Primary site in order to avoid log-in problems on Monday, March 23, 2015. The schedule of the mock trading is as follows: Mock trading from Primary Site (No change in TAP settings. Retain the settings of live market as of Friday, March 20, 2015): Saturday, March 21, 2015 Time Normal Market open time 10:00 hrs. 11:00 hrs. Normal Market close time Mock trading from BCP Site (Kindly change TAP settings as per Annexure-2): Saturday, March 21, 2015 Time 14:15 hrs. Normal Market open time 15:30 hrs. Normal Market close time 15:40 hrs. Position Limit/Collateral value Set up cut off time 15:40 hrs. Trade modification end time Re-Log in Session (Kindly change TAP settings as per Annexure- 3): Saturday, March 21, 2015 Time Live Re-login start time 17:00 hrs. Live Re-login close time 17:30 hrs. Members are required to perform the following: 

All the outstanding orders shall be purged before the start of trading from BCP site. Members using NNF software should clear the outstanding orders of session 1 in their systems before trading from BCP site.



Members should note that for TBT feed (both Multicast & TCP), sequence number will start from ‘1’ once trading starts from BCP site. Members using TBT feed should clear session 1 data and start fresh session in their systems before orders and trades feed start from BCP site.

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 1 of 9

 Select „BCP‟ radio button in TAP configuration parameters screen & save the same before login in BCP environment (Details as per Annexure-2). Login to BCP site shall be made available half an hour before market hours.  For login to live environment in re-login session and from Monday, March 23, 2015 onwards, please select the „Primary‟ radio button in TAP configuration parameters screen & save the same. (Details as per Annexure-3) For other important instructions members may refer to the following: Annexure 1: Operational instructions for BCP mock trading session Annexure 2: TAP configuration for BCP login for mock trading session Annexure 3: TAP configuration for login to LIVE environment during Re-login session For and on behalf of National Stock Exchange of India Limited

Janardhan Gujaran Chief Manager

Toll Free No 1800-22-00-53

Fax No +91-22-26598325

Email id [email protected]

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 2 of 9

Annexure – 1 Operational instructions for BCP mock trading session:

     

The Connect2NSE and Extranet facility on VSAT/Lease-line will not be available from 10 pm on Friday, March 20, 2015 to 6:30 PM on Saturday, March 21, 2015. However, Extranet facility on internet will be available. Co-location facility and Tick by Tick (TBT) feed shall be available. TBT feed will be available on the same Production IP's. There will not be any change in the IP's for accessing TBT feed for the mock. Trades resulting from this session shall not attract any obligation in terms of funds and / or securities pay-in and/or pay-out. Kindly do not transfer any data files for this session. Kindly participate actively participate in the BCP mock trading session from all trading software and re-login into live environment to check the connectivity and to avoid login problems on Monday, March 23, 2015. Kindly refer to the website of NSE at www.nseindia.com for any information which may be updated by the Exchange on the BCP mock trading session. In case of any queries please call on Toll Free no: 1800 2200 53.

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 3 of 9

Annexure – 2 1) TAP configuration for BCP login to mock trading setup on Saturday, March 21, 2015 2) INTEGRATED WINDOWS TAP CONFIGURATION 1) 2) 3) 4)

Start TCMS. Under the menu bar, select the TAB named ‘TAP’. Go to TAP Configuration and select the market segment you want to configure. In the configuration dialog, selecting ‘BCP’ Radio Button, your screen will look like this:

5) On Save click, under BCP Prompt below is just a confirmation asked when respective TAP is running.

Select ‘Yes’

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 4 of 9

6) Confirmation to save configuration for BCP environment.

Select ‘Yes’ 7) On successful modification, TCMS user will get a response “Parameter(s) updated successfully in Tap configuration file” for that particular market as shown in the fig. below. Thus indicating that the changes made are reflected correctly.

Then select ‘Save’ or ‘Save & Exit’ 1. INTEGRATED LINUX TAP CONFIGURATION 1) 2) 3) 4)

Start the TCMS. Select option TAP configuration Menu. Then select particular market type, in which you want to make the changes (e.g CD). To connect to BCP environment please select the option ‘Switch to BCP Configuration’

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 5 of 9

5) Then select ‘Save’ or ‘Save & Exit’.

2) Members are requested to verify following “Route” entries on their TAP server to ensure successful login at BCP site. Network Address 172.18.0.0 

Netmask 255.255.0.0

Gateway Address

Gateway address IP must be - TAP IP minus 1, which means, the last digit of the IP minus 1. Example:- If TAP Server IP is 10.222.10.2 then Gateway IP should be 10.222.10.1.

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 6 of 9

Annexure – 3 TAP configuration for login to LIVE environment during Re-login session and on Monday, March 23, 2015 INTEGRATED WINDOWS TAP CONFIGURATION 1) 2) 3) 4)

Start TCMS. Under the menu bar, select the TAB named ‘TAP’. Go to TAP Configuration and select the market segment you want to configure. In the configuration dialog, selecting ‘Primary’ Radio Button, your screen will look like this:

Primary:

5) On Save click, Prompt below is just a confirmation asked when respective TAP is running.

Select ‘Yes’

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 7 of 9

6) On successful modification, TCMS user will get a response “Parameter(s) updated successfully in Tap configuration file” for that particular market as shown in the fig. below. Thus indicating that the changes made are reflected correctly.

1. INTEGRATED LINUX TAP CONFIGURATION 1) 2) 3) 4)

Start the TCMS. Select option TAP configuration Menu. Then select particular market type, in which you want to make the changes. To connect to Primary environment please select the option ‘Switch to Primary Configuration’

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 8 of 9

5) Then select ‘Save’ or ‘Save & Exit’.

Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051

Page 9 of 9