Data Sheet No. PD60107 revX

IR2133/IR2135(J&S) & (PbF) IR2233/IR2235(J&S) & (PbF) 3-PHASE BRIDGE DRIVER Features • Floating channel designed for bootstrap operation Fully operational to +600V or+1200V Tolerant to negative transient voltage dV/dt immune • Gate drive supply range from 10V/12V to 20V DC and up to 25V for transient • Undervoltage lockout for all channels • Over-current shut down turns off all six drivers • Independent 3 half-bridge drivers • Matched propagation delay for all channels • 2.5V logic compatible • Outputs out of phase with inputs • All parts are also available LEAD-FREE

Product Summary VOFFSET IO+/VOUT ton/off (typ.) Deadtime (typ.)

600V or 1200V max. 200 mA / 420 mA 10 - 20V or 12 - 20V 750/700 ns 250 ns

Packages

Description The IR2133IR2135/IR2233IR2355 (J&S) are high voltage, high speed power MOSFET and IGBT driver with three independent high side and low side referenced output channels for 3-phase applications. Propri28-Lead SOIC etary HVIC technology enables ruggedized monolithic construction. 28-Lead PDIP Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. An independent operational amplifier provides an analog 44-Lead PLCC w/o 12 leads feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs can also be derived from this resistor. A shutdown function is available to terminate all six outputs. An open drain FAULT signal is provided to indicate that an over-current or undervoltage shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 volts or 1200 volts.

Typical Connection

up to 600V or 1200V

(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout.

www.irf.com

1

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The Thermal Resistance and Power Dissipation ratings are measured under board mounted and still air conditions. Symbol VB1,2,3 VS1,2,3 VHO1,2,3 V CC VSS VLO1,2,3 VIN

VIN,AMP VOUT,AMP VFLT dVS/dt PD

RthJA

TJ TS TL

Definition High side floating supply voltage

(IR2133/IR2135) (IR2233/IR2235) High side floating supply offset voltage High side floating output voltage Fixed supply voltage Logic ground Low side output voltage Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR)

Op amp input voltage (CA+ & CA-) Op amp output voltage (CAO) FAULT output voltage Allowable offset supply voltage transient Package power dissipation @ TA ≤ 25ºC (28 Lead PDIP) (28 Lead SOIC) (44 lead PLCC) Thermal resistance, junction to ambient (28 Lead PDIP) (28 Lead SOIC) (44 lead PLCC) Junction temperature Storage temperature Lead temperature (soldering, 10 seconds

Min.

Max.

-0.3 -0.3 VB1,2,3 - 25 VS1,2,3 - 0.3 -0.3 VCC - 25 -0.3 VSS - 0.3

625 1225 VB1,2,3 + 0.3 VB1,2,3 + 0.3 25 VCC + 0.3 VCC + 0.3 (VSS + 15) or (VCC + 0.3) whichever is lower VCC + 0.3 VCC + 0.3 VCC + 0.3 50 1.5 1.6 2.0 83 78 63 125 150 300

VSS - 0.3 VSS - 0.3 VSS - 0.3 — — — — — — — — -55 —

Units

V

V/ns W

ºC/W

ºC

Recommended Operating Conditions The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to COM. The VS offset rating is tested with all supplies biased at 15V differential.

Symbol Parameter Definition VB1,2,3 VS1,2,3 VHO1,2,3 V CC VSS VLO1,2,3 VIN VIN,AMP VOUT,AMP VFLT

High side floating supply voltage High side floating supply offset voltage (IR2133/IR2135) (IR2233/IR2235) High side floating output voltage Fixed supply voltage Low side driver return Low side output voltage Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR) Op amp input voltage (CA+ & CA-) Op amp output voltage (CAO) FAULT output voltage

Min.

Max.

VS1,2,3 + 10/12 VS1,2,3 + 20 Note 1 600 Note 1 1200 VS1,2,3 VB1,2,3 10 or 12 20 -5 5 0 VCC VSS VSS + 5 VSS VSS + 5 VSS VSS + 5 VSS VCC

Units

V

Note 1: Logic operational for VS of COM - 5V to COM + 600V/1200V. Logic state held for VS of COM -5V to COM -VBS. (Please refer to the Design Tip DT97-3 for more details). Note 2: All input pins, op amp input and output pins are internally clamped with a 5.2V zener diode.

2

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) Dynamic Electrical Characteristics VBIAS (VCC, VBS1,2,3) = 15V, VS1,2,3 = VSS, TA = 25oC and CL = 1000 pF unless otherwise specified. Symbol

Definition

Min. Typ. Max. Units Test Conditions

ton toff tr tf tsd titrip

Turn-on propagation delay Turn-off propagation delay Turn-on rise time Turn-off fall time SD to output shutdown propagation delay ITRIP to output shutdown propagation delay

500 450 — — 500 600

750 700 90 40 750 850

1000 950 150 70 1000 1100

tbl

ITRIP blanking time

—

400

—

tflt

ITRIP to FAULT propagation delay

400

650

900

tfil,in

Input filter time (HIN, LIN and SD)

—

310

—

tfltclr DT SR+ SR-

VIN = 0 & 5V VS1,2,3 = 0 to 600V or 1200V

ns

VIN,VSD = 0 & 5V VIN,VITRIP = 0 & 5V ITRIP = 1V VIN,VITRIP = 0 & 5V VIN = 0 & 5V

FLT-CLR to FAULT clear time

600

850

1100

VIN,VITRIP = 0 & 5V

Deadtime, LS turn-off to HS turn-on & HS turn-off to LS turn-on Amplifier slew rate (positive) Amplifier slew rate (negative)

100

250

400

VIN = 0 & 5V

5 2

10 2.5

— —

V/µs

NOTE: For high side PWM, HIN pulse width must be ≥ 1µ sec

Static Electrical Characteristics VBIAS (VCC, VBS1,2,3) = 15V unless otherwise specified and TA = 25oC. All static parameters other than IO and VO are referenced to VSS and are applicable to all six channels (HS1,2,3 & LS1,2,3). The VO and IO parameters are referenced to COM and VS1,2,3 and are applicable to the respective output leads: HO1,2,3 or LO1,2,3. Symbol

Definition

VIH VIL VFCLR,IH VFCLR,IL VSD,TH+ VSD,THVIT,TH+ VIT,THVOH VOL ILK

Logic “0” Input Voltage (OUT = LO) Logic “1” Input Voltage (OUT = HI) Logic “0” Fault Clear Input Voltage Logic “1” Fault Clear Input Voltage SD Input Positive Going Threshold SD Input Negative Going Threshold IITRIP Input Positive Going Threshold IITRIP Input Negative Going Threshold High Level Output Voltage, VBIAS - VO Low Level Output Voltage, VO Offset Supply Leakage Current (IR2133/IR2135) (IR2233/IR2235) Quiescent VBS Supply Current Quiescent VCC Supply Current Logic “1” Input Bias Current (OUT = HI) Logic “0” Input Bias Current (OUT = LO) “High” Shutdown Bias Current “Low” Shutdown Bias Current “High” IITRIP Bias Current “Low” IITRIP Bias Current

IQBS IQCC IIN+ IINISD+ ISDIITRIP+ IITRIPwww.irf.com

Min. 2.2 — 2.2 — 1.6 1.4 470 360 — — — — — — — — — — — —

Typ. Max. Units — — — — 1.9 1.7 570 460 — — — — 50 4 200 100 30 — 30 —

— 0.8 — 0.8 2.2 2.0 670 560 100 100 50 50 100 8 350 250 100 100 100 100

Test Conditions

V

mV

µA mA µA nA µA nA

VIN = 0V, IO = 0A VIN = 5V, IO = 0A VB1,2,3=VS1,2,3 = 600V VB1,2,3=VS1,2,3 = 1200V VIN = 0V or 5V VIN = 0V or 5V VIN = 0V VIN = 5V SD = 5V SD = 0V IITRIP = 5V IITRIP = 0V 3

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) Static Electrical Characteristics — Continued VBIAS (VCC, VBS1,2,3) = 15V unless otherwise specified and TA = 25oC. All static parameters other than IO and VO are referenced to VSS and are applicable to all six channels (HS1,2,3 & LS1,2,3). The VO and IO parameters are referenced to COM and VS1,2,3 and are applicable to the respective output leads: HO1,2,3 or LO1,2,3. Symbol Parameter Definition

Min. Typ. Max. Units Test Conditions

I FLTCLR+ “High” Fault Clear Input Bias Current

—

200

350

I FLTCLR- “Low” Fault Clear Input Bias Current

—

100

250

VBSUV+

VBSUV-

VBSUVH

V CCUV+

VCCUV-

V CCUVH

FLT-CLR = 0V µA

FLT-CLR = 5V

VBS Supply Undervoltage Positive Going Threshold (for IR2133/IR2233)

7.6

8.6

9.6

(for IR2135/IR2235)

9.2

10.4

11.6

(for IR2133/IR2233)

7.2

8.2

9.2

(for IR2135/IR2235)

8.3

9.4

10.5

(for IR2133/IR2233)

—

0.4

—

(for IR2135/IR2235)

—

1

—

VBS Supply Undervoltage Negative Going Threshold

VBS Supply Undervoltage Lockout Hysteresis

V

VCC Supply Undervoltage Positive Going Threshold (for IR2133/IR2233)

7.6

8.6

9.6

(for IR2135/IR2235)

9.2

10.4

11.6

(for IR2133/IR2233)

7.2

8.2

9.2

(for IR2135/IR2235)

8.3

9.4

10.5

VCC Supply Undervoltage Negative Going Threshold

VCC Supply Undervoltage Lockout Hysteresis (for IR2133/IR2233)

—

0.4

—

(for IR2135/IR2235)

—

1

—

—

70

100

Ω

Ron,FLT

FAULT- Low On Resistance

IO+

Output High Short Circuit Pulsed Current

200

250

—

IO-

Output Low Short Circuit Pulsed Current

420

500

—

mA

VOS

Amplifier Input Offset Voltage

—

0

30

mV

CA+=0.2V, CA-=CAO

IIN,AMP

Amplifier Input Bias Current

—

—

4

nA

CA+ = CA- = 2.5V

CMRR

Amplifier Common Mode Rejection Ratio

50

70

—

PSRR

Amplifier Power Supply Rejection Ratio

50

70

—

dB

CA+=0.2V, CA-=CAO VCC = 10V & 20V

5

5.2

5.4

V

CA+ = 1V, CA- = 0V

mV

VOH,Amp Amplifier High Level Output Voltage

—

—

20

I SRC,Amp Amplifier Output Source Current

4

7

—

I SNK,Amp Amplifier Output Sink Current

VOL,Amp

Amplifier Low Level Output Voltage

0.5

1

—

IO+,Amp

Amplifier Output High Short Circuit Current

—

10

—

IO-,Amp

Amplifier Output Low Short Circuit Current

—

4

—

4

VOUT = 0V, VIN = 0V PW ≤ 10 µs VOUT = 15V, VIN = 5V PW ≤ 10 µs

CA+ = 0.1V & 5V, CA- = CAO

CA+ = 0V, CA- = 1V CA+ = 1V, CA- = 0V, CAO = 4V CA+ = 0V, CA- = 1V, CAO = 2V

mA

CA+ = 5V, CA- = 0V, CAO = 0V CA+ = 0V, CA- = 5V, CAO = 5V www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) Functional Block Diagram

Lead Definitions Symbol

Lead Description

HIN1,2,3

Logic inputs for high side gate driver outputs (HO1,2,3), out of phase.

LIN1,2,3

Logic inputs for low side gate driver outputs (LO1,2,3), out of phase.

FAULT

Indicates over-current or undervoltage lockout (low side) has occurred, negative logic.

VCC

Logic and low side fixed supply.

ITRIP

Input for over-current shut down.

FLT-CLR

Logic input for fault clear, negative logic.

SD

Logic input for shut down.

CAO

Output of current amplifier.

CA-

Negative input of current amplifier.

CA+

Positive input of current amplifier.

VSS

Logic ground.

COM

Low side return.

VB1,2,3

High side floating supplies.

HO1,2,3

High side gate drive outputs.

VS1,2,3

High side floating supply returns.

LO1,2,3

Low side gate drive outputs

www.irf.com

5

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) Lead Assignments

ITRIP

FAULT

ITRIP

FAULT

FLT-CLR

LIN3

FLT-CLR

LIN3

CAO

LIN2

CAO

LIN2

CA-

LIN1

CA-

LIN1

CA+

HIN3

CA+

HIN3

SD

HIN2

SD

HIN2

VSS

HIN1

VSS

HIN1

COM

VCC

COM

VCC

LO3

VB1

LO3

VB1

LO2

HO1

LO2

HO1

LO1

VS1

LO1

VS1

VS3

VB2

VS3

VB2

HO3

HO2

HO3

HO2

VB3

VS2

VB3

VS2

28 Lead DIP

44 Lead PLCC w/o 12 Leads IR2133J IR2135J IR2233J IR2235J

IR2133 IR2135

28 Lead SOIC (Wide Body) IR2133S IR2135S IR2233S IR2235S

Part Number

HIN1,2,3

LIN1,2,3

ITRIP

SD FLT-CLR

FAULT

HO1,2,3

LO1,2,3

Figure 1. Input/Output Timing Diagram

6

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

HIN

HIN LIN ton

LIN

toff

tr 90%

50%

50%

50%

50%

tf

LO

90%

50%

50%

HO

HO LO

10%

10%

DT

Figure 2. Switching Time Waveform Definitions

DT

Figure 3. Deadtime Waveform Definitions

FLT-CLR

50%

50%

ITRIP

FAULT 50%

50%

Any Output 50%

tflt

tfltclr titrip

Figure 4. Overcurrent Shutdown Waveform

t in,fil

U

t in,fil

50% HIN/LIN

on off

on

off

on off

high HO/LO

low

Figure 4.5. Input Filter Function

www.irf.com

SD tsd

HO LO

90%

Figure 5. Shutdown Waveform Definitions

7

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

1500 Turn-on Delay Time (ns)

Turn-on Delay Time (ns)

1500 1200 900

M ax.

Typ.

600 M in.

300 0 -50

1200

M ax.

900

Typ.

600

M in.

300 0

-25

0

25

50

75

100

125

10

12.5

Temperature (oC)

1500

1200

Turn-Off Time (ns)

Turn-on Delay Time (ns)

20

Figure 6B. Turn-On Time vs. Voltage

1500

M ax.

900 Typ.

600

M in.

300

2.5

3

3.5

4

4.5

1200 900

M ax.

Typ.

600 M in.

300 0 -50

0 5

-25

0

25

50

75

100

125

Temperature ( C) o

Input Voltage (V) Figure 6C. Turn-On Time vs. Input Voltage

Figure 7A. Turn-Off Time vs. Temperature 1500

1500 1200

Turn-Off Time (ns)

Turn-Off Time (ns)

17.5

Supply Voltage (V)

Figure 6A. Turn-On Time vs. Temperature

M ax.

900

Typ.

600

M in.

1200 M ax.

900 Typ.

600

M in.

300

300

0

0 10

8

15

12.5

15

17.5

20

2.5

3

3.5

4

4.5

Supply Voltage (V)

Input Voltage (V)

Figure 7B. Turn-Off Time vs. Voltage

Figure 7C. Turn-Off Time vs. Input Voltage

5

www.irf.com

250

250

200

200

Turn-On Rise Time (ns

Turn-On Rise Time (ns

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

150 M ax.

100 Typ.

50

M ax.

150 Typ.

100 50 0

0 -50

-25

0

25

50

75

100

10

125

12.5

Fiure 8A. Turn-On Rise Time vs.Temperature

Turn-Off Fall Time

Turn-Off Fall Time

20

150

120 90 60

M ax.

Typ.

30

120 90

M ax.

60 Typ.

30 0

0 -50

-25

0

25

50

75

100

10

125

12.5

17.5

20

Figure 9B. Turn-Off Fall Time vs. Voltage

Figure 9A. Turn-Off Fall Time vs. Temperature

1500 SD to output SD Time (ns)

1500 1200 900

15

Supply Voltage (V)

Temperature (oC)

SD to output SD Time (ns)

17.5

Fiure 8B. Turn-On Rise Time vs.Voltage

150

M ax. Typ.

600 M in.

300 0 -50

1200

M ax.

900

Typ.

600

M in.

300 0

-25

0

25

50

75

100

125

10

12.5

15

17.5

20

Temperature ( C)

Supply Voltage (V)

Figure 10A. SD to Output shutdown Time vs. Temperature

Figure 10B. SD to Output shutdown Time vs. Voltage

o

www.irf.com

15

Supply Voltage (V)

Temperature ( C) o

9

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 1500 ITRIP to FAULT Time (ns

ITRIP to FAULT Time (ns

1500 1200 900

M ax. Typ.

600

M in.

300

1200 M ax.

900 Typ.

600

M in.

300 0

0 -50

-25

0

25

50

75

100

10

125

ITRIP to output SD Time (ns

ITRIP to output SD Time (ns

1800 1500 1200 M ax.

900 Typ. M in.

300 -50

-25

0

25

50

75

100

1500 M ax.

1200 Typ.

900 M in.

600

10

125

12.5

1200 M ax.

Typ. M in.

0

25

50

75

100

125

Temperature (oC) ________ ______ Figure 13A. FLT-CLR to FAULT clear Time vs. Temperature

10

17.5

20

Figure 12B. ITRIP to output shutdow n Time vs. Voltage FLT-CLR to FAULT clear Time (ns

FLT-CLR to FAULT clear Time (ns

1500

-25

15

Supply Voltage (V)

1800

300 -50

20

300

Figure 12A. ITRIP to output shutdow n Time vs. Temperature

600

17.5

1800

Temperature (oC)

900

15

Supply Voltage (V) _____ Figure 11B. ITRIP to FAULT Time vs. Voltage

Temperature (oC) _____ Figure 11A. ITRIP to FAULT Time vs. Temperature

600

12.5

1800 1500 1200

M ax.

900

Typ.

M in.

600 300 10

12.5

15

17.5

20

Supply Voltage (V) ________ ______ Figure 13B. FLT-CLR to FAULT clear Time vs. Voltage

www.irf.com

750

750

600

600 Deadtime (ns)

Deadtime (ns)

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

450 M ax.

300 Typ.

150

450

M ax.

300

Typ.

150

M in.

M in.

0

0 -50

-25

0

25

50

75

100

10

125

12.5

Temperature (oC)

Amplifier slew rate (v/ µs)

Amplifier slew rate (v/ µs)

16 12

Typ.

8 M in.

4

16 12 Typ.

8 M in.

4 0

0 -50

-25

0

25

50

75

100

10

125

12.5

15

17.5

20

Supply Voltage (V)

Temperature (oC) Figure 15A. Amplifier slew rate (+) vs. Temperature

Figure 15B. Amplifier slew rate (+) vs. Voltage

5

5 Amplifier slew rate (v/ µs)

Amplifier slew rate (v/ µs)

20

20

20

4 3 Typ. M in.

1 0 -50

4 3 Typ.

2

M in.

1 -25

0

25

50

75

100

Temperature (oC) Figure 16A. Amplifier slew rate (-) vs. Temperature

www.irf.com

17.5

Figure 14B. Deadtime vs. Voltage

Figure 14A. Deadtime vs. Temperature

2

15

Supply Voltage (V)

125

10

12.5

15

17.5

20

Supply Voltage (V) Figure 16B. Amplifier slew rate (-) vs. Voltage

11

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 6 Logic "0" Input Voltage (V)

Logic "0" Input Voltage (V)

6 5 4 3 M in.

2

5 4 3 M in.

2 1

1 -50

-25

0

25

50

75

100

10

125

12.5

4 3 2 M ax.

0 -50

4 3 2 M ax.

1 0

-25

0

25

50

75

100

125

10

12.5

Temperatre ( C)

17.5

Figure 18A. Logic "1" Input (OUT=HI), Fault Clear Input Voltage vs. Temperature

Figure 18B. Logic "1" Input (OUT=HI), Fault Clear Input Voltage vs. Voltage

3.0

3.0 SD Input TH (+) (V)

SD Input TH (+) (V)

15

2.5 M ax. Typ. M in.

1.5 1.0 -50

20

Supply Voltage (V)

o

2.0

20

5 Logic "1" Input Voltage (V)

Logic "1" Input Voltage (V)

5

2.5 M ax.

2.0

Typ. M in.

1.5 1.0

-25

0

25

50

75

100

Temperatre ( C) o

Figure 21A. SD Input TH(+) vs. Temperature

12

17.5

Figure 17B. Logic "0" Input Voltage (OUT=LO), Fault Clear Voltage vs. Voltage

Figure 17A. Logic "0" Input Voltage (OUT=LO), Fault Clear Voltage vs. Temperature

1

15

Supply Voltage (V)

Temperature ( C) o

125

10

12.5

15

17.5

20

Supply Voltage (V) Figure 21B. SD Input TH(+) vs. Voltage

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 3.0 SD Input TH (-) (V)

SD Input TH (-) (V)

3.0 2.5 M ax.

2.0

Typ.

1.5

M in.

1.0 -50

2.5 M ax.

2.0

Typ.

1.5

M in.

1.0 -25

0

25

50

75

100

125

10

12.5

Temperatre ( C) Figure 22A. SD Input TH(-) vs. Temperature

IITRIP Input TH (+) (mV)

M ax.

600

Typ. M in.

400 200 -50

800 M ax.

600

Typ. M in.

400 200

-25

0

25

50

75

100

125

10

12.5

Temperature ( C) Figure 23A. IITRIP Input TH(+) vs. Temperature

17.5

20

Figure 23B. IITRIP Input TH(+) vs. Voltage 900 IITRIP Input TH (-) (mV)

900 IITRIP Input TH (-) (mV)

15

Supply Voltage (V)

o

700 M ax. Typ. M in.

300 100 -50

700 M ax.

500

Typ. M in.

300 100

-25

0

25

50

75

100

125

Temperature (oC) Figure 24A. IITRIP Input TH(-) vs.Temperature

www.irf.com

20

1000

800

500

17.5

Figure 22B. SD Input TH(-) vs. Voltage

1000 IITRIP Input TH (+) (mV)

15

Supply Voltage (V)

o

10

12.5

15

17.5

20

Supply Voltage (V) Figure 24B. IITRIP Input TH(-) vs. Voltage

13

0.5 0.4 0.3 0.2 0.1

M ax.

0.0 -50

-25

0

25

50

75

100

125

Temperature (oC)

High Level Output Voltage (V)

High Level Output Voltage (V)

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

0.5 0.4 0.3 0.2 M ax.

0.1 0.0

10

0.3 0.2 0.1

M ax.

0 -50

-25

0

25

50

75

100

125

Temperature (oC)

300 200 100 M ax.

0 -50 -25

0

25

50

75 100 125

Temperature (oC)

Figure 27A. Offset Supply Leakage Current vs. Temperature

14

Offset Supply Leakage Current (µA)

Offset Supply Leakage Current (µA)

400

20

0.5 0.4 0.3 0.2 M ax.

0.1 0 10

12.5

15

17.5

20

Supply Voltage (V)

Figure 26B. Low Level Output vs. Voltage

Figure 26A. Low Level Output vs. Temperature

500

17.5

Figure 25B. High Level Output vs. Voltage

Low Level Output Voltage (V)

Low Level Output Voltage (V)

0.4

15

Supply Voltage (V)

Figure 25A. High Level Output vs. Temperature

0.5

12.5

500 400 300 200 100

M ax.

0 0

100

200

300

400

500

600

Supply Voltage (v)

Figure 27B. Offset Supply Leakage Current vs. Voltage

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 250 V Supply Current (µΑ)

V Supply Current (µΑ)

250 200 150 100 50

M ax.

Typ.

0 -50

200 150 100 M ax.

50

Typ.

0 -25

0

25

50

75

100

125

10

12.5

Temperature ( C) Figure 28A. VBS Supply Current vs. Temperature

V cc Supply Current (µA)

V cc Supply Current (µA)

12 8

M ax.

4

Typ.

0 -50

16 12 8

M ax.

4

Typ.

0 -25

0

25

50

75

100

125

10

12.5

Temperature ( C) Figure 29A. V cc Supply Current vs. Temperature Logic "1" Input Current (µA)

600 400 M ax. Typ.

-25

0

25

50

75

17.5

20

Figure 29B. V cc Supply Current vs. Voltage

800

0 -50

15

Supply Voltage (V)

o

Logic "1" Input Current (µA)

20

20

16

100

125

Temperature (oC) Figure 30A. Logic "1" Input Bais Current vs. Temperature

www.irf.com

17.5

Figure 28B. V BS Supply Current vs. Voltage

20

200

15

Supply Voltage (V)

o

800 600 400 M ax.

200

Typ.

0 10

12.5

15

17.5

20

Supply Voltage (V) Figure 30B. Logic "1" Input Bais Current vs. Voltage

15

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 800 Logic "0" Input Current (µA)

Logic "0" Input Current (µA)

800 600 400 200

M ax. Typ.

0 -50

-25

0

25

50

75

100

600 400 200

M ax. Typ.

0

125

10

12.5

Temperature ( C) Figure 31A. Logic "0" Input Bais Current vs. Temperature

"High" SD Bais Current (µA)

"High" SD Bais Current (µA)

200

M ax. Typ.

0 -50

-25

0

25

50

75

100

300 200 100

M ax.

Typ.

0 10

125

500 400 300 200 M ax.

-25

0

25

50

15

17.5

20

Figure 32B. "High" Shutdow n Bais Current vs. Supply Voltage "Low" SD Bais Current (nA)

"Low" SD Bais Current (nA)

Figure 32A. "High" Shutdow n Bais Current vs. Temperature

0 -50

12.5

Supply Voltage (V)

Temperature ( C) o

75

100

Temperature ( C) o

Figure 33A. "Low" Shutdow n Bais Current vs. Temperature

16

20

400

300

100

17.5

Figure 31B. Logic "0" Input Bais Current vs. Supply Voltage

400

100

15

Supply Voltage (V)

o

125

500 400 300 200 100

M ax.

0 10

12.5

15

17.5

20

Supply Voltage (V) Figure 33B. "Low " Shutdown Bais Current vs. Supply Voltage

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

"High" IITRIP Bias Current (µA)

"High" IITRIP Bias Current (µA)

400 300 200 100 M ax. Typ.

0 -50

-25

0

25

50

75

100

400 300 200 100

M ax.

Typ.

0 10

125

12.5

Figure 34A. "High" IITRIP Bais Current vs. Temperature

"Low" I ITRIP Bais Current (nA)

"Low" I ITRIP Bais Current (nA)

400 300 200 M ax.

-25

0

25

50

75

100

500 400 300 200 100

M ax.

0

125

10

12.5

Figure 35A. "Low" IITRIP Bais Current vs. Temperature

Figure 35B. "Low " IITRIP Bais Current vs. Supply Voltage

400 M ax. Typ.

-25

0

25

50

75

100

125

Temperature ( C) o

Figure 36A. "High" Fault Clear Input Bais Current vs. Temperature

"High" Fault Clear Input Current µ( A)

"High" Fault Clear Input Current µ( A)

600

www.irf.com

17.5

Supply Voltage (V)

800

0 -50

15

Temperature ( C) o

200

20

Figure 34B. "High" IITRIP Bais Current vs. Supply Voltage

500

0 -50

17.5

Supply Voltage (V)

Temperature (oC)

100

15

20

800 600 400 M ax.

200

Typ.

0 10

12.5

15

17.5

20

Supply Voltage (V) Figure 36B. "High" Fault Clear Input Bais Current vs. Supply voltage

17

800 600 400 200

M ax. Typ.

0 -50

-25

0

25

50

75

100

125

"Low" Fault Clear Input Current (µA)

"Low" Fault Clear Input Current (µA)

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 800 600 400 200

M ax. Typ.

0 10

12.5

Temperature ( C) Figure 37A. "Low" Fault Clear Input Bais Current vs. Temperature

V BS UV Th (+) (V)

V BS UV Th (+) (V)

M ax.

M in.

8 6 -50

-25

0

25

50

75

100

11 M ax.

9 8

Typ. M in.

6 -50

125

-25

0

Figure 38A. IR2135/IR2235 VBS Undervoltage Threshold (+) vs. Temperature

75

100

125

Figure 38B. IR2133/IR2233 V BS Undervoltage Threshold (+) vs. Temperature

14

12 V UV TH (+) (V)

V UV TH (+) (V)

50

Temperature ( C)

Temperature ( C)

12 M ax. Typ. M in.

8 6 -50

-25

0

25

50

75

100

Temperature ( C) o

Figure 39A. IR2135/IR2235 VBS Undervoltage Threshold (-) vs. Temperature

18

25

o

o

10

20

12

Typ.

10

17.5

Figure 37B. "Low" Fault Clear Input Bais Current vs. Supply Voltage

14 12

15

Supply Voltage (V)

o

125

11 M ax.

9 M in.

8

Typ.

6 -50

-25

0

25

50

75

100

125

Temperature ( C) o

Figure 39B. IR2133/IR2233 V BS Undervoltage Threshold (-) vs. Temperature

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 12 V cc UV TH (+) (V)

V cc UV TH (+) (V)

14 13 M ax.

11

Typ.

10

M in.

8 -50

-25

0

25

50

75

100

11 M ax.

9

Typ.

M in.

8

6 -50

125

-25

0

25

Temperature (oC) Figure 40A. IR2135/IR2235 Vcc Undervoltage Threshold (+) vs. Temperature

V cc UV TH (+) (V)

V cc UV TH (+) (V)

100

125

12 M ax.

11

Typ.

9 M in.

8 6 -50

-25

0

25

50

75

100

11 M ax.

9 Typ.

8

M in.

6 -50

125

-25

0

25

Temperature ( C) Figure 41A. IR2135/IR2235 V cc Undervoltage Threshold (-) vs. Temperature FAULT-Low On Resistance (Ω )

150 100 M ax. Typ.

50

-25

0

25

50

75

100

125

Figure 41B. IR2133/IR2233 Vcc Undervoltage Threshold (-) vs. Temperature

200

0 -50

50

Temperature (oC)

o

FAULT-Low On Resistance (Ω)

75

Figure 40B. IR2133/IR2233 V cc Undervoltage Threshold (+) vs. Temperature

12

75

100

Temperature ( C) o

Figure 42A. FAULT- Low On Resistance vs. Temperature

www.irf.com

50

Temperature ( oC)

125

150 120

M ax.

90

Typ.

60 30 0 10

12.5

15

17.5

20

Supply Voltage (V) Figure 42B. FAULT- Low On Resistance vs. Supply Voltage

19

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 500 Output Source Current (mΑ)

Output Source Current (mΑ)

500 400 Typ.

300

M in.

200 100 0 -50

-25

0

25

50

75

100

400 300 Typ.

200

M in.

100 0 10

125

12.5

Temperature ( C) o

Output Sink Current (mΑ)

Output Sink Current (mΑ)

1000

800 600

Typ. M in.

400 200 0 -50

800 600 Typ.

400

M in.

200 0

-25

0

25

50

75

100

125

10

12.5

Figure 44A. Ourput Sink Current vs. Temperature

Figure 44B. Ourput Sink Current vs. Supply Voltage

70 50 M ax.

Typ.

-25

0

25

50

75

100

Temperature ( C) o

Figure 45A. Amplifier Input Offest Voltage vs. Temperature

125

Amplifier Input Offset Voltage (mV)

Amplifier Input Offset Voltage (mV)

17.5

Supply Voltage (V)

90

-10 -50

15

Temperature ( C) o

20

20

Figure 43B. Output Source Current vs. Supply Voltage

1000

10

17.5

Supply voltage (V)

Figure 43A. Output Source Current vs. Temperature

30

15

20

90 70 50 30 10

M ax.

Typ.

-10 10

12.5

15

17.5

20

Supply Voltage (V) Figure 45B. Amplifier Input Offest Voltage vs. Supply Voltage

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF) 150 Amplifier CMRR (dB)

Amplifier CMRR (dB)

150 120 90 Typ.

60

M in.

30 0 -50

120 90 Typ.

60

M in.

30 0

-25

0

25

50

75

100

125

10

12.5

Temperature (oC) Figure 46A. Amplifier Common Mode Rejection Ratio vs. Temperature

Amplifier PSRR (dB)

Amplifier PSRR (dB)

75

Typ. M in.

50 25 0 -50

100 75

Typ. M in.

50 25 0

-25

0

25

50

75

100

125

10

12.5

Temperature ( C)

15

17.5

20

Supply Voltage (V)

o

Figure 47A. Amplifier Pow er Supply Rejection Ratio vs. Temperature

Figure 47B. Amplifier Power Supply Rejection Ratio vs. Supply Voltage 50

6.0 5.7

Amplifier V OL (V)

Amplifier V OH (V)

20

125

100

M ax. Typ.

5.1

M in.

40 30 20

M ax.

10

4.8

0

4.5 10

12.5

15

17.5

20

Supply Voltage (V) Figure 48. Amplifier High Level Output Voltage vs. Supply Voltage

www.irf.com

17.5

Figure 46B. Amplifier Common Mode Rejection Ratio vs. Supply Voltage

125

5.4

15

Supply Voltage (V)

10

12.5

15

17.5

20

Supply Voltage (V) Figure 49. Amplifier Low Level Output Voltage vs. Supply Voltage

21

15

Amplifier ISNK (V)

Amplifier ISRC(V)

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

12 9 6

Typ.

3

M in.

0

2.5 2.0 1.5 1.0 0.5

Typ. M in.

0.0 10

12.5

15

17.5

20

10

12.5

Supply Voltage (V)

20

Amplifier IO- (V)

Amplifier IO+ (V)

20

Figure 51. Amplifier Output Sink Current vs. Supply Voltage

16

Typ.

4 0

20 16 12 8 4

Typ.

0 10

12.5

15

17.5

Supply Voltage (V)

Figure 52. Amplifier Output High Short Circuit Current vs. Supply Voltage

22

17.5

Supply Voltage (V)

Figure 50. Amplifier Output Source Current vs. Supply Voltage

12 8

15

20

10

12.5

15

17.5

20

Supply Voltage (V)

Figure 53. Amplifier Output Low Short Circuit Current vs. Supply Voltage

www.irf.com

480V 320V 160V 0V

1E+3

1E+4

Ju n tio n T e m p e ratu re (°C )

120 110 100 90 80 70 60 50 40 30 20 1E+2

1E+5

120 110 100 90 80 70 60 50 40 30 20 1E+2

480 320V 160 0V

1E+3

1E+4

1E+5

Frequency (Hz)

Frequency (Hz)

Figure 7. IR2133J Junction Temperature vs Frequency Driving (IRGPC20KD2) Rgate = 5.1Ω @ Vcc = 15V

Figure 8. IR2133J Junction Temperature vs Frequency Driving (IRGPC30KD2) Rgate = 5.1Ω @ Vcc = 15V

120 110 100 90 80 70 60 50 40 30 20 1E+2

150 140 130 120 110 100 90 80 70 60 50 40 30 20 1E+2

480V 320V 160V 0V

1E+3

1E+4

1E+5

Ju n ctio n T e m p e ratu re (°C )

Ju n ctio n T e m p e ratu re (°C )

Ju n tio n T e m p e ratu re (°C )

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

480V

320V

160V 0V

1E+3

1E+4

1E+5

Frequency (Hz)

Frequency (Hz)

Figure 9. IR2133J Junction Temperature vs Frequency Driving (IRGPC40KD2) Rgate = 5.1Ω @ Vcc = 15V

Figure 10. IR2133J Junction Temperature vs Frequency Driving (IRGPC50KD2) Rgate = 5.1Ω @ Vcc = 15V

www.irf.com

23

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

500

300V

0V

1E+3

1E+4

Ju n ctio n T e m p e ratu re (°C )

Ju n ctio n T e m p e ratu re (°C )

900V 120 110 100 90 80 70 60 50 40 30 20 1E+2

1E+5

1120 1110 1100 90 80 70 60 50 40 30 20 1E+2

900V 500V

300

0V

1E+3

1E+4

Frequency (Hz)

Frequency (Hz)

Figure 11. IR2233J Junction Temperature vs Frequency Driving (IRG4PH30KD) Rgate = 20Ω @ Vcc = 15V

Figure 12. IR2233J Junction Temperature vs Frequency Driving (IRG4PH40KD) Rgate = 15Ω @ Vcc = 15V

900V 500V 300V

120 110 100 90 80 70 60 50 40 30 20 1E+2

300V

0V

1E+3

1E+4

1E+5

Ju n ctio n T e m p e ratu re (°C )

Ju n ctio n T e m p e ratu re (°C )

900V 500V

24

1E+5

120 110 100 90 80 70 60 50 40 30 20 1E+2

0V

1E+3

1E+4

1E+5

Frequency (Hz)

Frequency (Hz)

Figure 13. IR2233J Junction Temperature vs Frequency Driving (IRG4PH50KD) Rgate = 10Ω @ Vcc = 15V

Figure 14. IR2233J Junction Temperature vs Frequency Driving (IRG4ZH71KD) Rgate = 5Ω @ Vcc = 15V

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

Package Dimensions

28-Lead PDIP (wide body)

01-6011 01-3024 02 (MS-011AB)

NOTES

28-Lead SOIC (wide body) www.irf.com

01-6013 01-3040 02 (MS-013AE)

25

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

44-Lead PLCC w/o 12 leads

26

01-6009 00 01-3004 02(mod.) (MS-018AC)

www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S)&(PbF)

LEADFREE PART MARKING INFORMATION Part number

Date code

IRxxxxxx YWW?

Pin 1 Identifier ? P

MARKING CODE Lead Free Released Non-Lead Free Released

IR logo

?XXXX Lot Code (Prod mode - 4 digit SPN code)

Assembly site code Per SCOP 200-002

ORDER INFORMATION Basic Part (Non-Lead Free) 28-Lead PDIP IR2133 order IR2133 2 8-Lead SOIC IR2133S order IR2133S 28-Lead PDIP IR2135 order IR2135 28-Lead SOIC IR2135S order IR2135S 28-Lead PDIP IR2233 not available 28-Lead SOIC IR2233S order IR2233S 28-Lead PDIP IR2235 not available 28-Lead SOIC IR2235S order IR2235S 44-Lead PLCC IR2133J order IR2133J 44-Lead PLCC IR2135J order IR2135J 44-Lead PLCC IR2233J order IR2233J 44-Lead PLCC IR2235J order IR2235J

Leadfree Part 28-Lead PDIP 28-Lead SOIC 28-Lead PDIP 28-Lead SOIC 28-Lead PDIP 28-Lead SOIC 28-Lead PDIP 28-Lead SOIC 44-Lead PLCC 44-Lead PLCC 44-Lead PLCC 44-Lead PLCC

IR2133 IR2133S IR2135 IR2135S IR2233 IR2233S IR2235 IR2235S IR2133J IR2135J IR2233J IR2235J

order order order order order order order order order order order order

IR2133PbF IR2133SPbF IR2135PbF IR2135SPbF IR2233PbF IR2233SPbF IR2235PbF IR2235SPbF IR2133JPbF IR2135JPbF IR2233JPbF IR2235JPbF

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 This product has been qualified per industrial level Data and specifications subject to change without notice. 9/22/2005

www.irf.com

27