ELITE EVOLUTION LONG LIFE 5W30 Description Long-life synthetic lubricant, specially designed for vehicles with exhaust fume processing. It is carefully formulated with low ash content (Mid SAPS), which makes it suitable for the latest technologies in current engines and also helps to protect the environment by reducing harmful particle emissions to a minimum. Furthermore, its synthetic components means that it is a long-life lubricant, that is, a lubricant that allows extended change periods, according to the manufacturer's recommendation. It therefore helps to protect the environment by reducing harmful particle emissions to a minimum and prolonging oil change periods.

Properties • • • • • •

Recommended for petrol and diesel vehicles with or without turbocompressors and which have exhaust fume processing. Its synthetic components provide suitable antiwear protection for high-performance engines. Low fuel consumption due to its synthetic technology and carefully formulated viscosity. Long-life product, enabling oil change periods to be significantly extended without detriment to engine cleanliness. Excellent viscosity rating when cold starting; lubricant pumps easily on ignition, which reduces the time necessary for the film to form, thus decreasing wear. Its low ash content is necessary for the durability of the new emission reducing technologies such as the diesel particle filter (DPF), thus helping to preserve the environment more than conventional lubricants.

Quality levels • •

API SN/CF BMW LL-04

• •

•

ACEA C3 VW 502.00 / 505.00

MB 229.31

Technical specifications UNIT SAE grade Density at 15°C Viscosity at 100°C Viscosity at 40°C Viscosity at -30°C Viscosity Index Flash Point, open cup Pour Point T.B.N

PAGE 1 of 2 – ELITE EVOLUTION LONG LIFE 5W30

3

g/cm cSt cSt cP o C o C mg KOH/g

METHOD ASTM D4052 ASTM D445 ASTM D445 ASTM D5293 ASTM D2270 ASTM D92 ASTM D97 ASTM D2896

VALUE 5W-30 0.8494 12.3 72.0 6600 max 170 215 min -27 max 7.3

ELITE

Hazard Identification This product is not classified as toxic or dangerous under current legislation.

Handling Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.

Health and Safety Hazards Inhalation: Low-volatility product, therefore the risk from inhalation is minimal. Ingestion: Do not provoke vomiting. Drink water. Seek medical assistance. Contact with skin: Wash with abundant water and soap. Eyes: Wash with abundant water. General measures: Seek medical assistance.

Fire-fighting measures No special measures are required. Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.

Environmental precautions Danger of physical contamination in case of spillage (watercourses, coastal areas, the ground, etc.) due to its floating capacity and oily consistency, which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means.

A safety data file is available on request. www.repsoloil.com.my 006-03-51635393 Unless otherwise specified, the values cited in the technical specifications should be considered typical.

PAGE 2 of 2 – ELITE EVOLUTION LONG LIFE 5W30

ELITE