Tools 1. Iron 3. Fabric Marker 5. Thread Scissor 7. Others Scissor 9. Needle 11. Pin & Clips

2. Iron board 4. Ripper 6. Fabric Scissor 8. Thread 10. Measurement Tape

Materials 1. 2 fabrics 2. 1 Pattern Template 3. 1 Chinese Knot Button

1 Cut the template using a paper or others scissor.

** Do not use fabric scissor to cut others materials.

2 Take the 2 pieces of fabric

3

Face it right side on right side like shown.

4

Put the mold on the fabric then clip on it to make sure it stable.

5

Cut out the extra fabric using fabric scissor

6

This is how its look like after being cut follow the mold

7

Use measurement tape & fabric marker to draw ¼ inch from the inside of the fabric.

8

Do the same thing to both side of the fabric like shown

9

Fold it inside and clip on it to secure the line. Do it for both side of fabric.

10 Put in on iron board then iron the line to get more clear line.

11

Put back the fabric face the right side on the right side then clip on it.

12

Fold the mold like picture shown

13 Next, we have to draw a line

before fold the fabric like the mold.

14 Put the mold on the fabric, make a mark on the fabric then fold the mold up and draw the first line using fabric marker.

15

Fold and draw also the second line.

16 This is how it looks.

17

Next, fold the fabric in follow the line.

18 Same goes to other side.

19

Make sure the inner side is a line.

20 Its will look like this

21

Put a clip around the fabric

22 Start sew all around the fabric except the hole that we had fold before.

23

After sew it will looks like this. The hole that we left will be use to pull out inside of fabric.

24 Cut off all around the edge using scisscor to make it nice when we fold it.

25

Do not cut the line that we sew just now.

26 After that, turn in inside out.

27

Do the same thing to the other side.

28 it will looks like this. Make sure the edge of the pouch corner stand out properly

29

Sew a line along all the edge of the fabric

30 Start sewing.

31

This is how it will looks

32 Next step is we have to sew the button by hand.

33

We need to put and sew it like this

34 Take note this is two separated part

35 Start sew the button using hand needle.

36 Make sure the button was tight on the fabric

37

Finish for the first part, do the same thing for the second part of button.

38 Sew untill finish

Its done. U can put some embroidery such as name or important date on it.. Lets try!!