Naviplus-Document of The NAND Integrity Programmer

Update Wizard of The Naviplus NAND Integrity Programmer 1. Upgrade description: 1.1 Can’t put the NAND in adapter when Install process or machine start up; 1.2.Format the SD card with FAT32, TF card can also be,pay attention to TF card insertion for toward the contact points,and SD card inserted opposite; 1.3.Upzip the file and put the BIN file to the root of SD card,as follow:

1.4 When the installation or start up,NAND should not be placed on the adapter; 1.5.Click the Soft Update button;

Click here 1.6 Installation process will disply real-time ,don’s ejected the SD when install process.General installation process will be completed within 15 seconds.After completion,the machine will automatically restart and load the latest software version;

Click here

2 The operation after updated： ： 2.1.If the touchpanel is not sensitive after update,you can make a touchpanel calibration,click the Calibrate button in main interface will open the calibration interface,Click the ‘+’ sign that shows in panel step by step. If the ‘+’ sign disappear,must click any position of the screen for save the calibreate coordinate and quit the interface,if poweroff in the time ,the calibreate coordinate will lost and the system use the default touch coordinate for use; 2.2 Check the Config in the read&write interface for check whether same settings as before the update. Naviplus-Document of The NAND Integrity Programmer