Voucher Excel Upload setup in Tools 8.48

Step#1 Make sure the Integration gateway is loaded and the connectors are loaded and you are able to ping the gateway as shown below. Also you need to get into Gateway setup properties and setup your local default nodes.(do not have access to show the screen shots). This is very important.

Successful gateway ping.

Step#2 Once the nodes are all setup using Gateway Properties hyperlink. The integrationgateway.properties file should look like this.

Step#3 Make sure the Domain is active. When configuring the application server with PUB/SUB server YES only you will see the Dispatcher processes in this page.

If you see empty grids here need to visit your application server.

Step#4 Default local node should be pinged to a success.

Step#5 Open the QUEUE , VOUCHER and set the status to RUN and save this page.

Step#6 Open service operation VOUCHER_BUILD and set the status to ACTIVE as shown.

Step#7

Go to the handlers tab and activate the app class and save.

Step#8 Go to the Routings Tab and activate the VOUCHER_BUILD Inbound Async routing as shown and save.

Step#9

If you go to the next link , ROUTINGs and open the routing called VOUCHER_BUILD you should see that its active (we have already activated the message in the above screen).

Step#10 Setup on the Nodes. PSFT_AP_VCHR_XML

Connectors

http://gsplas134.peoplesoft.com:7003/PSIGW/PeopleSoftListeningConnector Make sure the Transaction is active on the Routings

Setup for the Local Node

Connectors

Please also check the security for Service Operations.

Step#11 Load the data through Excel

Check the data

Note: Make sure to save the XML where your Excel is located. If your Excel is on C:\TEMP\ , Then make sure to save the XML in C:\TEMP\