COPPER PREFABRICATION Copper prefabrication can be produced using a minimum of expensive fittings, the only fittings used in the installation of this basin float was 1 access cap and 4 bends. Full range basin floats can be tested off site and simply installed on site in one piece with the peace of mind that it has been tested and inspected. Large quantities can be produced and stored ready for delivery to accommodate the ever limited programme install times being made available at present.

Basin Float Range, DS4 Canary Wharf, 12 floors in total

Copper prefabrication can be produced for all services, swept or square branches can be utilised to replace expensive tees and silver solder pipework can be prefabricated off site in the same way steel prefabrication is used every day. Prefabrication can be produced from your sketches or we can offer our on site measuring service.

Shown left is a prefabricated twin elbow, this is one of the many items that we can prefabricate that cannot be purchased over the counter. Reducing tees with swept or square branch can also be made to suit your specifications and needs. 76mm Prefabricated Twin Elbow

COPPER PREFABRICATION

108mm back to back WC Float for UBS With material prices going up monthly and the quality of current labour levels patchy at best, this method ensures you get top quality associated with low costs, something this industry rarely sees in today's cut throat market place. Key Benefits • •

• •

Low costs Production of all prefabrication can be made in advance and delivered in quantities as requested by the client Low labour levels on site Pre-tested and checked in advance

End cap and branches all made using shaped pipe only. • • •

Domestics Pipework Waste pipework i.e. basin and soil floats Condensate for steam

159mm Cold Water Header