Dr. CHAN Sarin’s Profile Position Researcher and lecturer at ITC
Educations
October, 2011 : Ph.D Degree in Engineering, Mechanical Engineering, Institute of Technology Bandung (ITB), Indonesia (a sandwich program between ITB and Keio University, Japan), title: “Theoretical and Experimental Studies on Ejector Refrigeration Systems Activated by Low-temperature Heat Sources”. November 2007- October 2008 : Research student, Sato Laboratory, Department of System Design Engineering, Keio University, Yokohama, Japan. 2004-2006: Master of Engineering, ITB, Indonesia, title: “Development of Thermodynamic Equations of State for Alternative Refrigerants R-600 and R-600a”. 2001-2004: Bachelor of Engineering in Industrial and Mechanical Engineering at Institute of Technology of Cambodia (ITC), Cambodia. 2001-2004: Bachelor of Engineering in Industrial and Mechanical Engineering at Institute of Technology of Cambodia (ITC), Cambodia.
Professional Experiences
2011- Present: Researcher and Lecturer, Industrial and Mechanical Engineering Department, ITC, Cambodia. 2010-2011: Lecturer, Industrial and Mechanical Engineering Department, ITC, Cambodia. 2009: Turbo-compressors energy auditing and identifying the problems of cooling system for air compressors and auxiliary diesel generators for PT INCO, a Nickel production plant February 2007: Organizing committee and participant, AUN/SEED-Net Field-Wise Seminar on Mechanical and Aeronautical Engineering, Bandung, Indonesia. December 2006: Organizing committee and participant, The International Conference on Fluid and Thermal Energy Conversion 2006 (FTEC 2006), Jakarta, Indonesia. February- May 2004: Internship at ICM Limited (Industrial Construction and Maintenance) in CAD design and mechanical constructions. July- August 2003: Internship at DTW (Development Technology Workshop) in metal works. July- August 2002: Internship at TOMMY TEXTILEFactory as the generating set operator. April- June 2001: Internship at RM-Asia Co. Ltd in Maintenance of Diesel Engine (Silent Generator).
July- August 2000: Internship at SKDFactory in basic engineering works.
Feb-March: Training “Laboratory test of performances on gasoline and diesel engines” at laboratory of service ATM, Université Libre de Bruxelles, Belgium. May 2008: Certificate of training: “Textiles & Garments in the Global Economy”, May 12-17, 2008 at GIPC Center in Phnom Penh. 2004: Certificate of training: “Nouvelles technologies éducatives, Atelier 3.2″ from 05th to 10th July 2004, CNF Phnom Penh. 1994: Training course for 4 months (September-December) in the field “Technology of mechanical components” at the “Institut Universitaire de Technologie de MELAN SENART”, France.
Training Experiences
Research and Publications 1. 2. 3. 4. 5. 6.
Chan, S., Astina, I M., Suwono, A., Fukushima, T., Sato, H. (2011): Solar Powered Ejector Cooling Cycle, Transactions of the JSRAE, 28, 257-267. Chan, S., Fukushima, T. and Sato, H. (2011) : Experimental Study on Ejector Air-Conditioning System using R-134a as Working Fluid, Proceeding of the 3rd Regional Conference on Mechanical and Aerospace Technology, Manila. Chan, S., Suwono, A., Astina, I.M., Darmanto, P.S. and Sato, H. (2010) : CFD Assessment of a Combined Ejector Performance Analysis Method Applied with HCs Working Fluid, Proceeding of the Regional Conference on Mechanical and Aerospace Technology, Bali. Chan, S., Sato, H., Suwono, A., Astina, I.M. and Darmanto, P.S. (2009) : Exergy Analysis of a New Ejector-based Refrigeration Cycle using Propane as Refrigerant, Proceeding of the The 1st Regional Workshop on New/Renewable Energy, Bandung. Chan, S., Sato, H., Suwono, A., Astina, I.M. and Darmanto, P.S. (2008) : Ejector-based Refrigeratin Cycle using HCs as the Working Fluid, Proceeding of the 8th IIR Gustav Lorentzen Conference on Natural Working Fluids, Copenhagen. Chan, S., Takashi, T., Sato, H. and Suwono, A. (2008) : Feasibility Study on the Ejector-based Cooling System using Natural Refrigerants, Proceeding of the 18th Environmental Engineering Symposium, Tokyo.
Projects
Development of Prototype system for producing animal feed from beer dregs (Cooperative Research with NUOL), 2012.
Numerical Method for Engineering Air Conditioning Design Project Cool Production
Courses
Computer Programs Fluent 6.2, AutoCAD (2D&3D), SolidWorks , MS-Office and Visio, Dos, Adobe Photoshop, C++ and Fortran programming, Basic video editing, Computer reparation (Hardware and Software installation).
Contact Institute of Technology of Cambodia, Department of Industrial and Mechanical Engineering, Russian Federation Blvd, Post Box 86, Phnom Penh, Cambodia. Tel : +855-23-880-370/982-404 Fax : +855-23-880-369 E-mail:
[email protected]
