FAQ General​ ​questions Q:​ ​Who​ ​is​ ​this​ ​FAQ​ ​for? Installation Q:​ ​How​ ​do​ ​I​ ​install​ ​my​ ​new​ ​equipment? Q:​ ​How​ ​do​ ​I​ ​upgrade​ ​the​ ​software​ ​in​ ​my​ ​RFCM​ ​A91750? Usage Q:​ ​How​ ​do​ ​I​ ​use​ ​the​ ​new​ ​equipment? Troubleshooting Q:​ ​The​ ​equipment​ ​doesn’t​ ​work.

General​ ​questions Q:​ ​Who​ ​is​ ​this​ ​FAQ​ ​for?

A:​ ​This​ ​FAQ​ ​is​ ​for​ ​users​ ​of​ ​Innocom-arcodan​ ​products.

Installation Q:​ ​How​ ​do​ ​I​ ​install​ ​my​ ​new​ ​equipment?

A:​ ​Start​ ​by​ ​reading​ ​the​ ​installation​ ​manual.​ ​If​ ​there’s​ ​a​ ​problem,​ ​please​ ​contact​ ​the​ ​support.

Q:​ ​How​ ​do​ ​I​ ​upgrade​ ​the​ ​software​ ​in​ ​my​ ​RFCM​ ​A91750?

A:​ ​You​ ​need​ ​three​ ​things:​ ​the​ ​upgrade​ ​it​ ​self​,​ ​a​ ​manual​​ ​and​ ​the​ ​calibration​ ​data​ ​to​ ​your​ ​particular​ ​device. Please​ ​contact​ ​us​​ ​for​ ​the​ ​calibration​ ​files. Keep​ ​in​ ​mind​ ​that​ ​the​ ​upgrade​ ​is​ ​performed​ ​through​ ​both​ ​ethernet​ ​and​ ​serial​ ​line.​ ​If​ ​you​ ​use​ ​linux​ ​on​ ​your desktop,​ ​please​ ​contact​ ​us​​ ​for​ ​more​ ​information.

Usage Q:​ ​How​ ​do​ ​I​ ​use​ ​the​ ​new​ ​equipment?

A:​ ​Start​ ​by​ ​reading​ ​the​ ​manual.​ ​Next​ ​read​ ​the​ ​rest​ ​of​ ​this​ ​FAQ.​ ​If​ ​you​ ​can’t​ ​find​ ​the​ ​answer,​ ​please​ ​contact the​ ​support​ ​or​ ​pose​ ​a​ ​FAQ​ ​question​ ​in​ ​the​ ​form​ ​at​ ​the​ ​bottom​ ​of​ ​the​ ​page.

Troubleshooting Innocom-arcodan​ ​ApS​ ​-​ ​Innocom_Support_FAQ

Q:​ ​The​ ​equipment​ ​doesn’t​ ​work.

A:​ ​Is​ ​it​ ​connected​ ​to​ ​power​ ​and​ ​other​ ​external​ ​signal​ ​sources?​ ​Is​ ​it​ ​turned​ ​on?​ ​Otherwise​ ​start​ ​reading​ ​the manual.​ ​If​ ​that​ ​doesn’t​ ​solve​ ​the​ ​problem,​ ​read​ ​this​ ​FAQ.​ ​If​ ​every​ ​thing​ ​else​ ​fails,​ ​please​ ​contact​ ​us​ ​at http://contact.innocom.dk​.

Innocom-arcodan​ ​ApS​ ​-​ ​Innocom_Support_FAQ