NATIONAL STOCK EXCHANGE OF INDIA LIMITED DEPARTMENT : FUTURES & OPTIONS Download Ref No : NSE/FAOP/26337
Date : March 31, 2014
Circular Ref. No : 032/2014 All Members, Mock trading (Contingency) on Saturday, April 05, 2014 In continuation to our circular 093/2013 (Download No. 25231) dated December 11, 2013, the Exchange shall be conducting a mock trading (contingency) session in the Futures & Options Segment on Saturday, April 05, 2014 as per the following schedule: Saturday, April 05, 2014 Normal Market open time Normal Market close time Position Limit/Collateral value Set up cut off time Trade modification end time Live Re-login start time Live Re-login close time
Time 10:00 hrs. 15:30 hrs. 15:40 hrs. 15:40 hrs. 17:30 hrs. 18:00 hrs.
The following operational instructions are to be noted and acted upon: Annexure - 1: Important Instructions regarding mock trading Annexure - 2: Installation procedure for NEAT F&O (Version 9.3.5) Annexure - 3: Installation procedure for NEAT+ (Version 7.1.1) Annexure - 4: Precautions and procedure for reverting to earlier version Annexure - 5: Additional features For and on behalf of National Stock Exchange of India Limited
Suprabhat Lala Vice President
Toll Free No 1800-22-00-53
Fax No +91-22-26598449
Email id
[email protected]
Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051
Page 1 of 7
Annexure – 1 Important instructions regarding mock trading session 1. Trades resulting from this session shall not attract any obligation in terms of funds and / or securities pay-in and/or pay-out. Members are requested not to transfer any data files for this session. 2. Members having approved algorithmic software are required to adhere to circular 073/2013 (Download No. 24585) dated September 27, 2013 for mandatory participation in mock trading (contingency) session. 3. Kindly participate actively in the mock trading session from all trading software and re-login into live environment to check the connectivity and to avoid login problems on Monday, April 07, 2014. 4. Kindly refer to the website of NSE at www.nseindia.com for any information which may be updated by the Exchange on the mock trading session. 5. In case of any queries please call Toll Free no: 1800 2200 53.
Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051
Page 2 of 7
Annexure – 2 Installation procedure for NEAT F&O (Version 9.3.5) NEAT F&O Version 9.3.5 Precautions: Install the new version only after end of live trading hours and after all end of day activities have been completed on Friday, April 04, 2014. Members are advised to take back up of all report files before upgrading the software.
Members who wish to retain their existing market watch screen and client master are advised to take backup of the files 'mw****.dat and „cl****.dat‟ respectively (**** = userid). These files can be found at '\NSEOP\BACKUP' directory on the logon drive.
Members using Debarred Client Functionality are required to retain their existing Debarred Client list by taking backup of the file „deb****.dat‟ (**** = userid). The file can be found in '\NSEOP\BACKUP' directory on the logon drive.
Members using Order Price limits functionality can retain their price limits settings by taking backup of the file NSEOP\BACKUP\ldbordprilmt****.dat (**** = userid).
Members can retain their transaction costs settings of Net Position, if required by taking backup of the file NSEOP\BACKUP\BakSetCharge**** (**** = userid).
Members are advised to use the recommended minimum screen resolution of 800x600 for NEAT-F&O.
Installation: Installation files shall be available after 1700 hours on Friday, April 04, 2014 on path /faoftp/faocommon/Ver935 on NSE EXTRANET
Download the files spreltdr.9.3.5 and opneattdr.bat to your local hard disk drive (C:\ or D:\) and double click opneattdr.bat file to run the installer.
Go to NSEOP folder and run NEATOP.EXE
Updating the new version with latest data: Download and unzip following files from NSE EXTRANET path /faoftp/faocommon/ to your local hard disk drive (C:\ or D:\): a) contract.gz b) fo_participant.gz c) security.gz d) spd_contract.gz
Place the old „mw****.dat‟, „cl****.dat‟, deb****.dat, BakSetCharge**** files in C:\NSEOP\BACKUP directory.
ldbordprilmt****.dat
and
From the log on screen click on the “UPLOAD” button to update the contract, security, participant and spread combination contract details.
Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051
Page 3 of 7
Annexure – 3 Installation procedure for NEAT+ (Version 7.1.1) NEAT+ Version 7.1.1 Precautions: Install the new version only after end of live trading hours and after all end of day activities have been completed on Friday, April 04, 2014.
Take back up of all required data to a location other than NEATProDB-TWS and NEATProData-TWS folders before upgrading the software.
Take back up of client master through client master maintenance and debarred client master through debarred client master maintenance.
Take back up of Market watch through export functionality.
Installation: Installation files can be downloaded from NSE EXTRANET faoftp/faocommon/NEATPlus711 after 1700 hours on Friday, April 04, 2014.
path
Download the setup file „NEATPlusTWSSetup.exe‟ to your local hard disk drive (C:\) and double click on it to run the installer. Select the Installation drive. Click on ‘Install’ button on this pop up window and follow the installation instructions.
Message of successful installation will be displayed once the complete application is installed.
The user can run NEATPlus TWS application by double clicking on either of the following: a. NEATPlus TWS shortcut icon created on the desktop b. NEATPlus TWS entry in the „Programs‟ sub-menu of the „Start‟ menu c. NEATPLUS.exe located in the NEATProDB-TWS directory in the installation drive
Updating the new version with latest data: Download and unzip following files from NSE EXTRANET path /faoftp/faocommon/ to your local hard disk drive (C:\): a) contract.gz b) spd_contract.gz c) fo_participant.gz d) security.gz e) participant.gz
From the log on screen click on the “UPLOAD” button to update the contract, security, participant and spread combination contract details.
Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051
Page 4 of 7
Annexure – 4 These instructions are required to be followed to ensure that members are able to revert back to old version of NEAT-F&O 9.3.4 and NEAT+ 7.1.0. Steps to be followed for reverting to old version of NEAT-F&O & NEAT+: NEAT F&O Download the setup files for old version (spreltdr.9.3.4 and opneattdr.bat) from NSE EXTRANET path faoftp/faocommon/Ver934 to your local hard disk drive (C:\). If prompted, choose to overwrite the existing files. Double click opneattdr.bat file to run the installer.
Place the old „mw****.dat‟, „cl****.dat‟, „deb****.dat‟, BakSetCharge**** files in „C:\NSEOP\BACKUP‟ directory.
Download and unzip the fresh contract.gz, spd_contract.gz, fo_participant.gz and security.gz file from NSE EXTRANET path /faoftp/faocommon and upload them on your log on drive
ldbordprilmt****.dat
and
NEAT+ Download the setup file for old version „NEATPlusTWSSetup.exe‟ from NSE EXTRANET path faoftp/faocommon/NEATPlus710 to your local hard disk drive (C:\). If prompted, choose to overwrite the existing file. Kindly choose the same drive where the proposed new version was installed. Go to the drive where NEATPlusTWSSetup.exe is copied and double click on the NEATPlusTWSSetup.exe. The files will be extracted with the window pop up „NEATPlus TWS Installer extracting files‟. It will be followed by „NEATPlus Installer‟ pop up window. Installation drive (where application will be installed) will be C: by default. Installation of 7.1.0: Double click on the file NEATPlusTWSSetup.exe again. Select the same drive from which the earlier version was un-installed. Click on „Install‟ button on this pop up window and follow the installation instructions. Message of successful installation will be displayed once the complete application is installed. The user can run NEATPlus TWS application by double clicking on either of the following: a. NEATPlus TWS shortcut icon created on the desktop. b. NEATPlus TWS entry in the „Programs‟ sub-menu of the „Start‟ menu. c. NEATPLUS.exe located in the NEATProDB-TWS directory in the installation drive. From NSE EXTRANET path /faoftp/faocommon/ download contract.gz, security.gz, participant.gz & fo_participant.gz and unzip it on your log on drive. From the log on screen click on the “UPLOAD” button to update the contract, spread contracts, security, participant and portfolio details. Restore the backup of Market Watch, Client Master and Debarred Client Master and update the version with the latest data (as mentioned in Annexure 1)
Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051
Page 5 of 7
ANNEXURE – 5 Additional features 1. Tick-by-Tick market data over Multicast: Please read circular no. 021/2014 (Download No. 26120) dated March 10, 2014. Please find below parameters for receiving tick by tick market data over multicast Source 1 (Active)
Source 2 (Active)
Masters
Multicast
Recovery Server (Tick Agent Host) Multicast
Recovery (Tick Agent Host) Multicast Files
Tick Agent
Installer
Stream ID 1 2 3 4 IP Address 172.28.124.30
Multicast IP 239.70.70.21 239.70.70.22 239.70.70.23 239.70.70.24 Port 10990
Multicast Port 10821 10822 10823 10824
Stream ID 1 2 3 4 IP Address 172.28.124.31
Multicast IP 239.70.70.31 239.70.70.32 239.70.70.33 239.70.70.34 Port 10991
Multicast Port 10831 10832 10833 10834
Stream ID Multicast IP Multicast Port 101 239.70.70.11 10811 Extranet Path /faoftp/faocommon/tbt_masters Extranet Path /faoftp/faocommon/TBT_Linux/TICK_AGENT_LINUX_1.0.2 /faoftp/faocommon/TBT_Windows/TICK_AGENT_WINDOWS_1.2
2. ‘Cancel on Logout (COL)’ ‘COL facility at User level’ is being provided. Corporate Manager of a trading member can enable / disable user level COL flag for their users. The salient features of COL at User level are: Corporate Manager shall have an option to enable / disable the user level COL facility for their users By default the User level COL facility shall be disabled for all users. If a user for whom User level COL flag is enabled logs out, all outstanding orders shall be cancelled for that user. Corporate manager can enable/disable users for COL before, after or anytime during the market hours. ‘COL facility at order entry level’ is being provided to users that can be specified for an order. As and when the user is logged out, either a clean sign out (voluntary) or due to any technical reason (involuntary), outstanding orders that are marked with COL shall be cancelled irrespective of whether such User id is enabled for COL or not by Corporate Manager.
Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051
Page 6 of 7
The salient features of COL at Order entry level are: COL can be specified for Regular Lot, Stop Loss and Spread Orders. COL can be specified for Limit as well as Market Order. In order entry the default value for COL shall be „Non-COL‟. User shall be required to explicitly select the value for the COL field as „COL‟ if required. COL can be specified only for Day Orders. COL shall not be applicable to IOC orders. User shall not be able to modify COL during order modification. 3. Kill Switch An additional facility „Kill Switch‟ is being provided. When the Kill switch function is executed, all outstanding orders shall be cancelled. A) Trading member level: The trading member level kill switch shall be available to Corporate Manager of a trading member. When trading member level kill switch is executed, all outstanding orders of that trading member shall be cancelled. The salient features of trading member level Kill Switch are: Only corporate manager can execute this Kill Switch All outstanding orders of all users of that trading member shall be cancelled B) User level: The User level kill switch functionality shall be available to all users. When user level kill switch is executed, all outstanding orders for that user shall be cancelled. The salient features of Kill Switch at user level are: User Level Kill Switch is available to all users. On executing user level Kill Switch, all outstanding orders entered by that user shall be cancelled. 4. Others (NEAT software only)
Users shall not be able to login to live trading system w.e.f. Monday, April 07, 2014 with the following software – o o o o
NEAT-FO Admin NEAT F&O (NEATPro) version 1.0.7 NEAT F&O 9.3.3 NEAT+ 7.0.9
Users shall be able to login to live trading system w.e.f. Monday April 07, 2014 with the following software only – o NEAT F&O 9.3.4 and 9.3.5 o NEAT+ 7.1.0 and 7.1.1
Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai – 400 051
Page 7 of 7
