LibertyGT 1111B-MCRT2 COTS, PXIe-Modular, Touchscreen, User Programmable, Multi-Function, Software Defined Synthetic, Benchtop, Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Knowledge is good! www.radxtech.com Radio Test, Microwave, RF & Wireless Comms Stimulus, Test & Measurement (T&M) Apps Preliminary Product Overview Page 1 of 4 The RADX® LibertyGT® 1111B-MCRT2 (LGT1111BMCRT2) is the first COTS, PXIe-modular, real-time, multifunction, user programmable, open-architecture, integrated, touchscreen optimized, software defined, Automated Test System (ATS) that is specifically configured for highperformance, high dynamic-range Multi-Channel, RealTime, Radio Test applications. The LGT1111B combines National Instruments® (NI) PXIe modules with RADX LGT FPGA-accelerated Measurement Science Firmware and Software (MSFS) that employs a unique, real-time, modular, Software Defined Synthetic Instrument (SDSI®) architecture with an intuitive LGT1111B-MCATS Supports Unique, Multi-Channel Vector Signal touchscreen interface and open standard Generation, Multi-Channel Real-Time Vector Signal Analysis and programmability. The LGT1111B includes a Comprehensive Multi-Channel Radio Test comprehensive suite of RF and microwave T&M instruments and Apps (Applications) that enable a single LGT1111B to replace a dozen “boxed” T&M Instruments. Consequently, the LGT1111B significantly reduces ATS Size, Weight and Power (SWaP) and Total Cost of Ownership (TCO), while dramatically improving measurement throughput. The LGT1111B also features unique Apps for real-time, multi-channel radio testing:  The LGT Multi-Channel (Channelized) Real-Time Vector Signal Analyzer (LGT MCRTVSA) combined with the system’s NI PXIe-5665 VSA PXIe Module, enables the LGT1111B-MCRT2 to support up to 128 concurrent, real-time, RF Measurement Channels, located within a 50 MHz span with up to 500 kHz of bandwidth per channel (up to the aggregate bandwidth of the NI PXIe-5665) with LGT standard demods including AM, FM, PM, BPSK, QPSK, QAM, FSK, PSK or ASK across a frequency range of 20 Hz to 3.6 GHz.

Replace MULTIPLE “Boxed” T&M Instruments with ONE LibertyGT Benchtop ATS to IMPROVE Throughput and REDUCE SWaP and TCO

 The LGT Multi-Channel Vector Signal Generator (LGT MCVSG) combined with the system’s NI PXIe-5673E VSG PXIe module also supports concurrent transmission of up to 16 RF Stimulus Channels (with LGT standard modulation including AM, FM, PM, BPSK, QPSK, QAM, FSK, PSK or ASK), each with up to 500 kHz bandwidth per channel, located within a 100 MHz span across a frequency range of 85 MHz to 3.2 GHz. With its unique modular hardware and software architecture, the LGT1111B-MCRT2 also supports “in-the-box” upgrades that add additional T&M capabilities and substantially extend the systems upper frequency range. RADX is a National Instruments Silver Alliance Partner with RF and Wireless Specialty Alliance Partner designation. The LGT1111B is a member of the LibertyGT Family-- developed in collaboration with NI and selected by Frost & Sullivan for a 2014 Global New Product Innovation Award. For More Info Visit www.radxtech.com or Email RADX Sales at [email protected] Call +1 (619) 677-1849 x 1

LibertyGT 1111B MCRT2 COTS, PXIe-Modular, Touchscreen, Programmable, Multi-Function, Software Defined Synthetic, Benchtop, Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Radio Test Preliminary Product Overview (Cont’d)

Page 2 of 4

LGT1111B-MCRT2 Key Features and Benefits The LGT1111B sets a new standard for cost-effective, high-throughput, multifunction, parametric, real-time test of multichannel commercial and military radios, avionics, wireless communications and other RF and microwave systems where the combination of programmability, flexibility, performance, throughput, long life cycle support and low TCO is essential.  Optimized for Multi-Channel Radio Testing – Unique Multi-Channel Measurement and Stimulus Apps  Channelized, Real-Time VSA App-- Simultaneously Receive and Analyze up to 128 Independent RF Channels for Precision Transmitter Testing  Multi-Channel VSG App--Simultaneously Transmit Up to 16 Independent RF Channels for Precision Receiver Testing – Excellent RF Specs and a Full Range of Analog & Digital Modulation & Demodulation Capabilities Included

 Unique, Object Oriented, Modular Software Defined Synthetic Instrument (SDSI) Architecture – SDSI Approach “Synthesizes” Multiple T&M Instruments and Apps on top of a common suite of PXIe modules via an optimized RADX Hardware Abstraction Layer (HAL) – SDSI enables multi-function ATS capability that eliminates multiple “boxed instruments” to reduce SWaP, Maintenance Expense and TCO – SDSI isolates test programs from underlying hardware to enable replacement of End-of-Life (EOL) PXIe modules with RADX qualified, MSFS-compatible replacement PXIe modules — that significantly reduces costly Lifetime Buys and test program maintenance costs

 Real-Time, FPGA-accelerated, Concurrent MSFS Eliminates “Data Gaps” to Improve Results and Measurement Throughput

– RADX' patented and patent-pending, real-time, Xilinx® FPGA-accelerated MSFS eliminates data gaps for effective measurement and analysis of spectrally adaptive and frequency agile signals and transients – Concurrent Processing enables multiple Apps to run in parallel to improve throughput and reduce unit test costs

 Modular, COTS, & Low-Risk

 Comprehensive RF & Microwave Measurement & Stimulus ATS Capability in a Single 5U System – LGT ATS Suite provides over a dozen SDSI-enabled LGT Apps and Instruments to Provide Comprehensive RF & Microwave ATS Capability from a Single 5U System – One LGT can replace multiple box instruments to dramatically reduce SWaP and maintenance costs (and TCO) while simultaneously improving measurement throughput – RADX MSFS Bundles simplifies configurations and provides comprehensive T&M Capabilities at Value Prices

 Intuitive & User Friendly State-of-the-Art, 1080p HD Touchscreen Optimized User Interface with Primary & Auxiliary Display Support for All Apps

 Designed and Assembled in the USA LGT1111B Systems are designed and assembled in San Diego, CA where the city’s motto is “Semper Vigilans” (Ever Vigilant).

– Modular, COTS PXIe Hardware Architecture based on NI PXIe Modules and RADX PXIe Enclosure enables modulelevel (versus system level) repairs, spares, upgrades and tech insertion for improved MTTR and reduced TCO – Patented and Patent-Pending Real-Time MSFS includes proven IP licensed exclusively to RADX from BAE Systems – Available NIST-Traceable NI Calibration Service for NI rd PXIe Modules or 3 Party / DIY Calibration Using NI Published Cal Procedures ® – Includes MS Windows 7 Pro 64-bit, NI LabVIEW , LabVIEW FPGA, and TestStand™ Binary Runtime Licenses and Software Foundation – Includes RADX COTS, Patent-Pending, 18-Slot PXIe Benchtop LGTE Enclosure with Hinged Front Panel with 1080p Touchscreen Display and Front-to-Back Filtered Air Cooling -- optimized for flexibility and serviceability

 Open Architecture, User Programmable – Win7 Based, Open Source API compatible with Python (Scripting), LabVIEW, TestStand, C, C++, C# and Java for all Instruments & Apps enables cost effective User or 3rd party Test Program Set (TPS) development and re-use – Unified Programming Model with Built-In Test Executive reduces programming complexity, time and costs when compared to programming multiple, disparate instruments – Supports Local (GUI/Script) & Remote (VISA TCP/IP) Ops – Optional IVI Compliant Drivers for Traditional ATE Apps – Compatible with 3rd Party Win7 Compliant PXI/PXIe Apps – (Future) Windows Authentication and Open SQL Server for TPS, UUT and Other Data

For more info visit www.radxtech.com, email RADX Sales at [email protected] or call +1 (619) 677-1849 x 1

LibertyGT 1111B-MCRT2 COTS, PXIe-Modular, Touchscreen, Programmable, Multi-Function, Software Defined Synthetic, Benchtop, Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Radio Test Preliminary Product Overview (Cont’d)

Page 3 of 4

LGT1111B-MCRT2 for Comprehensive Multi-Channel, Real-Time Radio Test and Precision Wireless Comms, RF & Microwave Stimulus, T&M The LGT1111B-MCRT2 is designed to provide comprehensive, multifunction support for multi-channel radio test and a wide range of wireless communications, RF and microwave stimulus, test and measurement applications— right out of the box. The LGT1111BMCRT2 is available with the following standard and optional capabilities (subject to change and technology refreshment): • LGT1111B Std. PXIe Enclosure

• LGT1111B-MCRT2 Multi-Channel

– RADX Patent Pending LGTE-RF3 18-Slot, PXIe Enclosure with 12 GB/sec Backplane – Integrated 1080p HD Touchscreen LCD Display Mounted on Unique, Hinged Front Panel for Module Access and Serviceability – Module and App-Compatible with NI PXIe-1085 – Modular, Autosensing, Int’l Power Supply: 100240VAC, 50-60Hz, 6-12A with 15A CB – Front-to-Back Filtered Air Cooling with QuickChange, Modular Fan Assemblies – Integrated Rack Mount Ears and Handles – Internal Connector Panel connects Front Panel and User Definable Rear RF and Misc. I/O – Dimensions: 8.75” (222.3 mm) H x 19” (482.6 mm) W x 22.0” (558.8 mm) D – Fully Configured Operating Weight: 56 Pounds (25.4 kg)

• LGT1111B Std. NI PXI/PXIe Modules – See www.ni.com for details – NI PXIe-8135 i7 Quad Core Embedded Controller with Removable HDD – NI PXIe-5665 VSA  Frequency Range: 20 Hz to 3.6 GHz  Phase Noise: -129 dBc/Hz at 10 kHz Offset (800 MHz center frequency)  Instantaneous Bandwidth: 50 MHz (3 dB)  Average Noise Floor at 1 GHz: -165 dBm/Hz  Amplitude Accuracy: ±0.1 dB (typical) – NI PXIe-5673E VSG with List Mode  Frequency Range: 85 MHz - 3.3 GHz  Instantaneous Bandwidth: 100 MHz  Phase Noise: -112 dBc/Hz at 10 kHz (1 GHz Center Frequency)  RF Output Power Up to +10 dBm  Fast and Deterministic Configuration Changes with RF List Mode – NI PXIe-7975R FlexRIO FPGA Module (for RealTime DSP Functions and MSFS) – NI PXI-5160 2-Ch, 10-bit, 2.5 GSPS DSO/Digitizer with 2 GB RAM and Probe Kit – NI PXI-4461 Dynamic Signal Analyzer (for Audio Analyzer) – NI PXI-4065 DMM and Probe Kit – NI Calibration Certificates

• LGT1111B Std. I/O & UUT Interfaces I/O FEATURE RF Receiver Input RF Transmitter Output 2-CH Audio Frequency Input 2-CH Audio Frequency Output 2-CH DSO Input with Ext’l Triggering DMM Inputs Generic Analog I/Q BER Digital Data I/O Int’l 10 MHz Ref or Ext’l 10 MHz Ref Input with 10 MHz Ref Output 3 x USB 2.0/3.0, 2 x GigE, 1 x RS-232C 1 x External 1080p HD Auxiliary Display Port Flux Capacitor Time Dilation Option

I/O PANEL FP FP FP FP FP FP RP FP/RP RP FP/RP RP RP

MSFS Apps & Instruments – LGT1111B Multi-Channel, Channelized, RealTime Vector Signal Analyzer supports up to 128 RX CH with AM, FM, PM, BPSK/QPSK, FSK2-8, PSK2-8 & ASK2-8 demodulation – LGT1111B Multi-Channel Vector Signal Generator supports up to 16 TX CH with AM, FM, PM, BPSK/QPSK, FSK2-8, PSK2-8 and ASK2-8 modulation

• LGT1111B-MCRT2 Std. MSFS Apps &

Instruments – – – – – – – –

–

–

– – –

LGT Single-Channel, Real-Time VSA App LGT Spectrum Analyzer App LGT RF Power Meter App LGT RF Frequency Counter & Error Meter App LGT 2-Ch Dig. Storage Oscilloscope (DSO) App LGT Arbitrary Waveform Generator (AWG) App LGT Digital Multi-Meter (DMM) LGT 2-Channel Audio Analyzer App with Audio Frequency Sig Gen, Digitizer, Frequency Counter and Error Meter, Level Meter, SINAD and THD+N Meters LGT Single-Channel Real-Time Demodulator: AM, FM, PM, SSB, BPSK, QPSK, OQPSK, MSK/GMSK, FSK2-32, PSK4-32, ASK2–32, QAM16–256 LGT Single-Channel Modulation Analyzer: AM, FM, PM, SSB, BPSK, QPSK/OQPSK, MSK/GMSK, FSK 2-32, PSK4-32, ASK2–32, QAM16–256 LGT Bit Error Rate (BER) Tester with Data Pattern Generator LGT Standard Single Channel Spectrum and Waveform Capture, Analysis and Playback LGT Integrated, Single-Channel Radio Tester including RF Receiver, Narrow Band Spectrum Analyzer, Modulation Analysis & Audio Analysis

• LGT MSFS Foundation – MS Windows 7 Pro 64-bit OS with (future) User Authentication and Test Executive Functionality – NI LabVIEW, LabVIEW FPGA and TestStand (for Alignment and PVT) Binary Licenses – LGT 64-bit, Object Oriented MSFS Framework with HW Abstraction Layer & Concurrency Mgr. – LGT Ergonomic, 1080p HD Touchscreen User Interface for all Apps with Configuration Specific Primary & Aux Display Support – LGT Quick-Start Diagnostics (Built-In-Test) – LGT Open Architecture Application Programming Interface (API) for All Apps, Instruments & Functions with Support for LabVIEW, TestStand, Python (Scripting), C, C++ and Java – LGT Open Source Test Procedure Set (TPS) Framework with LabVIEW and TestStand Programming and Python Scripting Support – LGT Unit Under Test (UUT) Control App with Radio Test Emulator (RTE) UUT Example – (Future) LGT Open Architecture SQL Database for Test Results, Cal Factors, TPS, etc. – LGT VISA TCP/IP Remote Interface – LGT Std. and Configuration-Specific Performance Verification Test (PVT) App – USB License Key, Software Media, Binary Software License and Docs

• LGT1111B Std. Accessories Kit – – – – –

8 GB DDR-3 for NI PXIe-8135 500+ GB Primary Removable SSD for PXIe-8135 USB3 Backup Archival HDD USB Keyboard with Trackpad Radio Test Emulator (RTE) System Software (for Customer or Separately Purchased RTE) – Misc. Tools and Cables – Double Wall Shipping Container

• LGT1111B Std. Alignment Kit – NIST Traceable RF Power Meter – Alignment Cable Set and Tools

• LGT1111B Designed to Comply with Key Quality, Safety, EMI/EMC & Environmental Standards – Designed, Assembled & Tested in the USA by RADX and Core Systems (ISO9001:2008) – FCC A, CE, UL, IEC 60068-2-1 & -2 – MIL-PRF-28800F Class 3 including Class 3 Low Temp & Class 2 High Temp Limits – Environmental and Standard Compliance Certification Available (Contact RADX for Details)

• LGT1111B Export Information – System: ECCN 5A992, LE NLR – MSFS & RTSA-1: ECCN 3D991, LE NLR – RTSA-2: ECCN 3D001, License Req’d

• LGT1111B Std. Warranty & Calibration – Hardware: 1 Year RTF Warranty – Software: 1 Year SW Maintenance – Extended Warranty Available – PXI/PXIe Module Level Cal Service Available from RADX or NI – NI Module Cal Procedures available at http://goo.gl/Hp16gE.

• Available LGT1111B Options (Contact RADX for Details) – LGTE-RF4 Enclosure with 24 GB/sec Backplane – LGT Precision 10 MHz +/- 50 PPB Reference and Low Noise Distribution Amp – LGT Real-Time Spectrum Analyzer (RTSA-1) – LGT RTSA-2 (Export Controlled) – LGT Advanced Spectrum/Waveform Capture & Playback App with PXIe RAID Support – LGT Standard Specific OFDM and other Mod/Demod Libraries – LGT IVI Compliant Remote I/F – LGT Radio Test Emulator System (Includes Embedded PC, NI USRP 2920 SDR & Accessories (Software Sold Separately) – LGT Advanced Arbitrary Waveform Generator App with NI PXIe-5442 AWG – LGT IEEE-488 GPIB UUT Interface – LGT MIL-STD-1553B UUT Interface – LGT Legacy Radio Test Bundle with Radio Test RFIU, Power Attenuator, Cable Ass’y & Switches – LGT 22”, 24” or 27” Aux Touchscreen Display – LGT1111B Tailored Pelican Transit Case – Customer Specific Models, Mods/Demods, MSFS & TPS available

For more info visit www.radxtech.com, email RADX Sales at [email protected] or call +1 (619) 677-1849 x 1

LibertyGT 1111B-MCRT2 COTS, PXIe-Modular, Touchscreen, User Programmable, Multi-Function, Software Defined Synthetic, Benchtop, Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Radio Test Preliminary Product Overview (Cont’d)

Page 4 of 4

LGT1111B: Real-Time MSFS, Intuitive User Interface & Open Architecture APIs The LGT1111B features an extensive suite of tightly-integrated RADX Real-Time Measurement Science Firmware and Software (MSFS) that includes patented and patent-pending real-time SDSI technology exclusively licensed to RADX by BAE Systems®. The LGT1111B MSFS utilizes extensive real-time FPGA processing to eliminate measurement data gaps found in non-real-time signal analyzers and radio testers that affect measurement fidelity on multi-channel, spread spectrum and other advanced, digital and analog signals. LGT1111B MSFS Applications (Apps) feature intuitive graphical user interfaces optimized for the system’s HD 1080p touchscreen display. Every LGT1111B App and Instrument includes a comprehensive Application Programming Interface (API) that enables users to easily develop, share, and re-use Test Program Sets (TPS) using LabVIEW, TestStand, Python, C, C++ or Java that can automatically sequence hundreds of measurements and store the results for pass/fail and detailed diagnostics in the system’s Open Architecture SQL database. The combination of RADX real-time MSFS Apps with NI PXIe modules, LabVIEW and TestStand software enables the LGT1111B to deliver the most comprehensive and cost effective real-time, multi-channel radio test capability available in the market today.

LGTE-RF3 PXIe Enclosure: PatentPending, Touchscreen & ServiceOptimized The LGT1111B is deployed in the RADX LGTE-RF3 5U, 18Slot, Touchscreen PXIe enclosure that features an integrated, 1080p HD touchscreen display mounted on the system’s unique hinged front panel which is optimized for module level field service, upgrades and technology insertion to significantly reduce MTTR and TCO. Designed by RADX and manufactured by Core Systems USA, the LGTE-RF3 features front-to-back, filtered air cooling, a modular, international power supply and fan assembly designed for quick MTTR, and an Internal Connector Panel (ICP) that enables convenient routing of RADX and User Defined analog and digital signals from the front to the rear of the enclosure for rack-mount, ATS applications. The LGTE-RF3 features a 12 GB/sec PXIe backplane. The LGTE-RF4, with a 24 GB/sec PXIe backplane, is available as an option for the LGT1111B. Both the LGTE-RF3 and RF4 are 100% App and Module compatible with the NI PXIe-1085.

About RADX Technologies, Inc. (RADX) RADX is a DSP-focused small business that provides cost-effective, high-performance, COTS software, systems, solutions and services to end-users, OEMs and system integrators at multiple levels of integration. As a National Instruments Silver Alliance Partner with RF and Wireless Specialty Alliance Partner designation, RADX has a solid team of experts with decades of experience developing advanced, real-time FPGA, multi-core CPU, and GPU-based DSP solutions for consumer, commercial, aerospace and defense applications in Software Defined Synthetic Instrumentation (SDSI), Software Defined Radio (SDR) and Cognitive Radio (CR) markets. The LGT1111B is a member of the LibertyGT Family-- developed in collaboration with NI and selected by Frost & Sullivan for a 2014 Global New Product Innovation Award. For more info, please visit www.radxtech.com, contact RADX Sales at [email protected] or call +1 (619) 677-1849 x 1 RADX Technologies, Inc. • 15090 Avenue of Science, Suite 104 • San Diego, CA 92128 • +1 (619) 677-1849 x 1 • www.radxtech.com • [email protected] © Copyright 2016, RADX Technologies, Inc. All Rights Reserved. The LibertyGT Base MSFS contains technology licensed exclusively to RADX by BAE Systems that is protected by U.S. Patents 8514919, 8744025, 8717006 and 8164498 and other pending patents. RADX LGTE-RFE includes patent-pending RADX technology. RADX, the RADX logo, LibertyGT and SDSI are registered trademarks that are the property of RADX Technologies, Inc. All other trademarks are the property of their respective owners. RADX-LGT1111B-MCRT2-4P-OVU-2.7-11SEP16.

Information in this publication is subject to change without notice.