Tasks - Section E Duray Lighting 500 East Touhy Avenue, Suite F, Des Plaines, IL 60018 773-271-2800 www.duraylighting.com
Task Section E E1
Spec D Lite
E2
NUC Lite
E3
Little "D" Lite
E4
Deluxe "D" Lite
E5
Task "D" Lite
E6
Solid Front Task T5
E7
Task Big "D" Lite
E8
Prewired Little "D" Lite
E9
DCG Series
E10
GLI Series
Duray Lighting, Inc a Division of Weslite Inc. 500 E. Touhy Ave, Suite F, Des Plaines, IL 60018 | 7732712800 Office | 7732714410 Fax
[email protected]
Task T5 Electronic
Spec D Lite CATALOG No.
LAMP
BALLAST TYPE
LENGTH
DUC108-ES
1-8WT5
Electronic
12¼"
DUC113-ES
1-13WT5
Electronic
21½"
DUC208-ES
2-8WT5
Electronic
24½"
DUC813-ES
1-8WT5 1-13WT5
Electronic
33½"
DUC213-ES
2-13WT5
Electronic
42½"
CATALOG No. LAMP
BALLAST TYPE
DUC114
1-14WT5
ELECTRONIC
22-11/16”
DUC121
1-21WT5
ELECTRONIC
34-1/2”
DUC128
1-28WT5
ELECTRONIC
46-5/16”
CODE
DESCRIPTION
CODE
LENGTH
Bottom Without Diffuser
DESCRIPTION
MOUNTING HOLES (2) 1/2" DIA. K.O.
3/16" DIA. K.O. (3)
K
Convenience outlet
N
Rocker Switch
40
Connector
SPTW6’
6’ Cord/plug/white
Accessories rated for 120 volt ballast. Additional options and accessories available. Contact factory for details.
7/16" DIA. K.O.
9/16" x 1-1/8" K.O. 1" SQ. K.O.
SPECIFICATIONS HOUSING: Entire construction rigidly die formed of code gauge steel.
Back
SHIELDING: White ribbed acrylic diffuser easily installed and removable by finger pressure. FINISH: High gloss white enamel.
3/16" DIA. K.O.
7/8" DIA. K.O.
ELECTRICAL: All units wired with " A" sound rated ballasts incorporating Class P thermal protection, for 120 vold, 60 cycle AC. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Units may be surface mounted, individually or in continuous rows. LABELS: U/L and I.B.E.W.
5" 1"
PROPRIETARY NOTE
Except for uses expressly granted in writing, information disclosed hereon is confidential and all rights, patent or otherwise, are reserved by Duray Fluorescent Mfg. Co.Specification subject to change without notice.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E1
Task
NUC Series
T5
Specifications HOUSING: Code gauge steel sheet metal die formed construction. SHIELDING: One piece UV stabilized clear translucent polycarbonate diffuser for soft and even - glare illumination. Installs and removed by finger pressure for ease of re-lamping. ELECTRICAL: Electronic ballast incorporating Class "P" thermal protection. 120 volts AC 60 Hz standard. Class "A" sound rating. Ballasts mounted in direct contact with housing for maximum head dissipation. Sockets completely wired. INSTALLATION: Key hole slots provided for surface mounting, individually or in continuous rows. FINISH: Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant powder urethane polyester coating, electrostatic applied and baked at 375°F. Custom colors available, consult factory. LABELS: U/L listed and I.B.E.W.
.50 KO 2-PLS.
OTHER: Accessories rated for 120 volt use.
Front view without diffuser
.56 DD KO 2- PLS
*Other options, lamp and ballast configurations available, consult factory.
1.03
End View
2.44
ORDERING INFORMATION: NUC
-
Series: NUC - Narrow task light
Color W - White B- Black
Lamp Wattage & nominal fixture length 108 - 12½", 8 watt, T5 113 - 21½", 13 watt, T5 114 - 22¾", 14 watt, T5 121 - 34½", 21 watt, T5 128 - 46½", 28 watt, T5 208 - 24½", (2) 8 watt, T5 213 - 42½", (2) 13 watt, T5 813 - 33½", (1) 8 watt, (1) 13 watt, T5
Example NUCW114 - T5-Q
T5
-
Lamp Type
Options & Accessories
T5 - 5/8" lamp diameter
J - Black cord with in-line switch & plug SPTW6’ - 6' white cord w/ plug
Accessories rated for 120 volt ballast. Additional options and accessories available. Contact factory for details.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E2
Task Starter Type T5, T8& T12/SSB, Electronic
Little "D" Lite Model Number
Number of Lamps
Ballast Type
Nominal Length
MIDGET SIZE MUC108-S
1-8W
NPF/SSB/T5
12-1/4"
MUC115
1-15W
Starter type, LPF T8
18-1/8"
MUC115-S
1-15W
NPF/SSB/T8
18-1/8”
TUC114-S
1-14W
NPF/SSB/T12
15-1/8"
TUC115-S
1-15W
NPF/SSB/T12
18-1/8"
TUC117-S
1-17W
NPF/SSB/T8
24-1/8"
TUC120-S
1-20W
NPF/SSB/T12
24-1/8"
QUC130-S
1-30W
NPF/SSB/T12
36-1/8"
QUC140-S
1-40W
NPF/SSB/T12
48-1/8"
COMPACT SIZE
SPECIFICATION MODELS
ELECTRONIC COMPACT & SPECIFICATION
MIDGET
HUC115-S
1-15W
HPF/SSB/T12
18-1/8"
HUC120-S
1-20W
HPF/SSB/T12
24-1/8"
HUC130-S
1-30W
HPF/SSB/T12
36-1/8"
HUC140-S
1-40W
HPF/SSB/T12
48-1/8"
HUC117
1-17W
HPF/SSB/T8
24-1/8”
HUC125
1-25W
HPF/SSB/T8
36-1/8”
HUC132
1-32W
HPF/SSB/T8
48-1/8”
ELECTRONIC T8
7/8" (2)
back
7/8" (2) KO
SPECIFICATIONS HOUSING: Entire construction rigidly die-formed of code gauge steel.
1-1/8"
6
1-9/16"
1-
SHIELDING: One piece light stabilized white translucent acrylic diffuser for soft and even-glare illumination. Easily installed and removable by finger pressure. FINISH: For improved adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating. Bright chrome is luxuriously plated for appearance and endurance.
2-5/8"
ELECTRICAL: All units wired with A sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available for HPF models. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: continuous rows.
Diffuser
Diffuser
1-
2¾"
1-5/8"
Units may be surface mounted, individually or in
OPTIONS & ACCESSORIES (rated for 120 volt ballast)
LABELS: U/L and I.B.E.W. CODE
DESCRIPTION
K
Grounded Convenience Outlet
N
Rocker switch installed (white)
SPTW6’
6' cord/plug/white
Chrome, Oak or Walnut finish available on special order. Additional options and accessories available. Call factory for more information. Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E3
Task Electronic T12 & T8/SSB
Deluxe D Lite CATALOG NUMBER DDUCH115-S CATALOG NUMBER
LAMP 1-15W LAMP
BALLAST TYPE
LENGTH
SSB/T12
18-1/6"
BALLAST TYPE
LENGTH
DDUCH117
1-17W
T8/SSB
24-1/6"
DDUCH125
1-25W
T8/SSB
36-1/6"
DDUCH132
1-32W
T8/SSB
48-1/6"
Options & Accessories CODE
DESCRIPTION
K
Grounded convenience outlet
N
Rocker switch installed (white)
SPTW6’
6' Cord/plug/white
Accessories rated for use with 120 volt ballast only. Additional options and accessories available. Call factory for details.
Bottom without diffuser
SPECIFICATIONS HOUSING: Entire construction rigidly die formed of code gauge steel. SHIELDING: White ribbed Acrylic diffuser easily installed and removable by finger pressure. FINISH: High gloss white enamel. ELECTRICAL: All units wired with " A" sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages are available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
Back
INSTALLATION: Units may be surface mounted, individually or in continuous rows. LABELS: U/L and IBEW
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E4
Task T8/SSB, T5 Electronic
Task “D” Lite CATALOG NUMBER
LAMP
BALLAST TYPE
DSF115-S
1-15W
SSB/T8
LENGTH 18¼"
ELECTRONIC DSF108-ES
1-8W
T5
12¼"
DSF113-ES
1-13W
T5
21¼"
DSF208-ES
2-8W
T5
24¼"
DSF813-ES
1-8W,1-13W
T5
33½"
DSF213-ES
2-13W
T5
42½"
Options & Accessories CODE
DESCRIPTION
F
Fuse
K
Grounded Convenience Outlet
N
Rocker switch installed (white)
SPTW6’
6' Cord/plug/white (more cord & plug options available)
Ribbed Diffuser
2-7/8”
1/2”
Accessories rated for use with 120 volt ballast only.
SPECIFICATIONS
4¾”
End view without diffuser
HOUSING: Entire construction rigidly die-formed of code gauge steel. SHIELDING: Ribbed acrylic diffuser. Easily installed and removable by finger pressure.
1-3/8”
FINISH: High gloss white enamel. ELECTRICAL: All units wired with A sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired.
7/8” DIA KO EACH END
INSTALLATION: Units may be surface mounted, individually or in continuous rows. LABELS: U/L combined with I.B.E.W.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E5
Task Electronic T5 /SSB
Solid Front Task—T5 CATALOG NUMBER
LAMP
BALLAST TYPE
LENGTH
DST114
1-14W
T5 Electronic
22-13/16”
DST121
1-21W
T5 Electronic
34-11/16”
DST128
1-28W
T5 Electronic
46-1/2”
Options & Accessories CODE
DESCRIPTION
F
Fuse
K
Grounded Convenience Outlet
N
Rocker switch installed (white)
SPTW6’
6' Cord/plug/white (more cord & plug options available)
38
Toggle switch installed
Top without diffuser:
*Accessories rated for use with 120 volt ballast only.
3 X 1/2 KO
SPECIFICATIONS 2X MTG. HOLES
1-1/8 X 9/16 KO
1 SQ. KO
HOUSING: Entire construction rigidly die-formed of code gauge steel. SHIELDING: Ribbed acrylic diffuser. Easily installed and removable by finger pressure. FINISH: High gloss white enamel.
Front:
ELECTRICAL: All units wired with A sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired INSTALLATION: continuous rows.
2x 3/16 DIA.
Starter hole
3x 1/2 DIA KO
Units may be surface mounted, individually or in
LABELS: U/L combined with I.B.E.W.
Socket MNT.
Cover lance
Right/Left ends—identical
3x Ballast MNT.
Ribbed Diffuser
5”
3” 1/2
1.1 5/8” DIA KO
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E6
Task Electronic T12 & T8/SSB
Task Big D Lite CATALOG NUMBER
LAMP
BALLAST TYPE
LENGTH
DSFHD115-S
1-15W
SSB/T12
18-1/16”
DSFH117
1-17W
SSB/T8
24-1/16”
DSFH125
1-25W
SSB/T8
36-1/16”
DSFH132
1-32W
SSB/T8
48-1/16”
Options & Accessories CODE
DESCRIPTION
F
Fuse
K
Grounded Convenience Outlet
N
Rocker switch installed (white)
SPTW6’
6' Cord/plug/white (more cord options available)
38
Toggle switch installed
3”
Accessories rated for use with 120 volt ballast only.
Ribbed Diffuser
1/2”
SPECIFICATIONS HOUSING: Entire construction rigidly die formed of code gauge steel. SHIELDING: Ribbed acrylic diffuser. Easily installed and removable by finger pressure.
End view without diffuser
5-1/8”
FINISH: High gloss white enamel. ELECTRICAL: All units wired with " A" sound rated ballasts and except for simple reactive type, incorporating Class P thermal protection, for 120 volt, 60 cycle AC. Other voltages are available. Ballasts mounted in direct contact with housing for maximum heat dissipation. Sockets completely wired. INSTALLATION: Units may be surface mounted, individually or in continuous rows.
1-3/4”
7/8” DIA KO EACH END
LABELS: U/L and IBEW
Two 7/8” DIA KO
Two mounting Two mounting holes
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E7
Task Pre-wired Little "D" Lite Model Number
Number of Lamps
Ballast Type
Electronic/Starter Type
Nominal Length
SPMUC115-S
1-15W
Electronic
18-1/8"
SPKMUC115
1-15W
Starter type, LPF
18-1/8”
OPTIONS & ACCESSORIES CODE
DESCRIPTION
L
Lamp installed (1-F15T8CW)
R
Pull chain
Accessories rated for use with 120 volt ballast only.
SPECIFICATIONS Housing: Entire construction rigidly die-formed of code gauge steel.
9”
Shielding: One piece light stabilized white translucent acrylic diffuser for soft and even glare-free illumination. Easily installed and removable by finger pressure.
4.5”
Finish: For improved paint adhesion and rust resistance, all metal parts are cleansed by a multi-stage process and treated with an iron phosphate coating.
18”
Electrical: All units wired with UL Approved ballasts for 120 volt, 60 cycle AC current only. Ballasts mounted in direct contact with housing for maximum heat dissipation. Installation: Units may be surface mounted, individually or in continuous rows. Prepunched holes in body facilitate quick mounting to ceiling outlet boxes. Labels: U/L combined with I.B.E.W.
1.25”
Chrome, Oak or Walnut finish available on special order. Consult factory.
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E8
Designer Decorative Ceiling Globe
DCG Series APPLICATIONS
MOLDED OF DURABLE NON-CORROSIVE
THREADED SCREW NECK FIXTURES
OPTIONAL PULL CHAIN
SPECIFICATIONS
COOL WHITE LAMP INCLUDED
UL LISTED FOR DAMP LOCATIONS
THREADED SCREW NECK ACRYLIC GLOBE
WHITE BODY AND DIFFUSER
CEILING GLOBE
8”
6”
ORDERING INFORMATION: Example DCGG13-WW-L DCG Body
Lamp Type Series
G13W GU-24 (electronic)
White
DCG
Diffuser White
Options L - Lamp R - Pull chain
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E9
Task GLI T4 & T5 Series Model Number
Number of Lamps
Ballast Type
Nominal Length (A)
GLI106
1-F6T4
Electronic
10¾”
GLI110
1-F10T4
Electronic
15½”
GLI116
1-F16T4
Electronic
20½”
GLI120
1-F20T4
Electronic
24½”
GLI114
1-F14T5
Electronic
24½”
GLI121
1-F21WT5
Electronic
35¾”
GLI128
1-F28WT5
Electronic
47½”
GLI135
1-F35WT5
Electronic
59½”
APPLICATIONS
Under Cabinet and Bookcases Office Furniture
1¾”
Computer Workstations Retail Displays Task Lighting
A
Suitable for indoor use only
FEATURES
Fixtures are complete with a cool white lamp, rocker switch, nominal 5’ white cord set, and UV stabilized lens. Fixtures can be installed in continuous rows up to a maximum of ten fixtures.
1¾”
To space fixtures apart, connection cables are available in lengths of 6”, 12”, 18”, 24”, 36” and 48”. Fixtures can be hardwired.
3/4”
Specifications subject to change without notice.
A Division of Weslite Inc.
500 E. Touhy Ave, Des Plaines, IL 60018
Phone 773-271-2800 Fax 773.271.4410 www.DurayLighting.com
E10
